help from WISP users. after about a week of normal operation on Falconsat 3, I started only seeing from Falconsat: one line of C0,C1,ETC CODE lines followed by the BRC data, then five lines of PHT data, then repeating. I suspect some WISP settings have changed. can someone point me in the right direction? thank you. Christy KB6LTY
That does not sound normal... I am not seeing that, so I don't think anything changed on the server.
Is it still updating the directory? Or is it full of holes?
There are much more experienced PacSat users than me who may be able to advise.
On Thu, Jan 18, 2018 at 8:52 AM, cchunter3@mindspring.com wrote:
help from WISP users. after about a week of normal operation on Falconsat 3, I started only seeing from Falconsat: one line of C0,C1,ETC CODE lines followed by the BRC data, then five lines of PHT data, then repeating. I suspect some WISP settings have changed. can someone point me in the right direction? thank you. Christy KB6LTY _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
participants (2)
-
cchunter3＠mindspring.com -
Chris Thompson