Well that throws a wrench in the works.... humm

Thanks for the info... did not see anything about this in the manual at all

Thanks Again

David, KK4QOE

-----Original Message----- From: David W0DHB [mailto:dave@w0dhb.net] Sent: Wednesday, May 27, 2015 5:41 PM To: 'David L Warnberg'; amsat-bb@amsat.org Subject: RE: [amsat-bb] 9600 baud and IC-9100

David

This is true, the unprocessed FM audio require for 9600 baud packet is only on pin 4 of the DATA2 jack, it is not available through the USB soundcard built in to the 9100. :-(

Dave W0DHB

-----Original Message----- From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of David L Warnberg Sent: Wednesday, May 27, 2015 10:25 AM To: amsat-bb@amsat.org Subject: [amsat-bb] 9600 baud and IC-9100

Ok, so I'm hearing something I cannot verify. I have be trying to capture 9600 baud packets from BRICSat. Now I discover on the IC-9100 yahoo group someone is saying the IC-9100 does not handle 9600 baud packets over the USB port. I find this hard to believe but can any confirm or deny this claim?

I have had issues catching anything with the IC-9100 and 9600 baud packets so was wondering if it was the setup or the radio.

All feedback welcome please..

David, KK4QOE

_______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb