The G6LVB unit also works great with Orbitron and the Wisp driver.   RoD KD0XX

--- On Mon, 3/2/09, Mark L. Hammond [email protected] wrote:

From: Mark L. Hammond [email protected] Subject: [amsat-bb] Re: LVB Tracker and HRD Sat Tracker setup Problem To: [email protected], "racer5039" [email protected] Date: Monday, March 2, 2009, 9:22 PM

Hi Marv,

I don't think that HRD supports a control box in either EasyComm or GS232 modes yet, so the LVB Tracker isn't going to work. It is still in the "developmental" stage as I recall. So, you probably cannot get it to work right with that program...

So--you might want to check out SatPC32. It's a super program, and if/when you register, ALL of the money goes to AMSAT!

73,

Mark N8MH

• Subject: [amsat-bb] LVB Tracker and HRD Sat Tracker setup Problem
• From: "racer5039"

<mailto:[email protected]racer5039@xxxxx>

• Date: Mon, 2 Mar 2009 18:22:47 -0600

---

I got my LVB Tracker box today and while going through the setup I have

found a

couple of things. To start off. I am using HRD 4.1 B2055, Sat Tracker 4.1 B 2019. Radio is a Kenwood 2000 Rotor is the G-5500 In the rotator set up of HRD there is no option for the GS 232B so I have

no

control of the ELEV. I have looked thought the other posts on HRD site but cant seem to find any

talk of a fix for this. I have check the com to the rotor and can move them by hand just fine with

both

the GS 232 & EasyComm. Can someone point me to the right area to fix this problem please. Thanks Marv N0FJP

Mark L. Hammond [N8MH] _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb