I am trying to program the TH-D72a for satellite operation using the Kenwood MCP-4 software. I need some direction to enable me to transmit on one vfo and receive on the other. I'm finding nothing on YouTube . I know it can be done but unclear on the steps to get there. Thanks for your help . 73 Jim K8ZZU EN82/EL96 (in the winter)
http://sats.wikidot.com/how-do-i-program-the-kenwood-th-d72a-for-satellites
73, John Brier KG4AKV
On Mon, Aug 27, 2018, 15:46 James Sanford k8zzu@sbcglobal.net wrote:
I am trying to program the TH-D72a for satellite operation using the Kenwood MCP-4 software. I need some direction to enable me to transmit on one vfo and receive on the other. I'm finding nothing on YouTube . I know it can be done but unclear on the steps to get there. Thanks for your help . 73 Jim K8ZZU EN82/EL96 (in the winter) _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
participants (2)
-
James Sanford -
John Brier