Bob,

Perhaps you could use it for moon bounce. You could at least listen to the DL0SHF 10 GHz EME beacon (http://www.pa0ehg.com/dl0shf_beacon.htm). It has been demonstrated to be doable with an RTLSDR dongle and and LNB: https://www.rtl-sdr.com/receiving-10-ghz-reflected-moon-beacon-rtl-sdr/ I hope to do something similar in the future, but I'm currently too busy and having too much fun with the LEO satellites.

73,

Mac Cody / AE5PH

On 10/13/2017 10:00 AM, Robert Bruninga wrote:

I have an old 1m dish and get wall-to-wall signals on a spectrum analyzer scanning the Geo arc.

Is there anything at all that anyone can do with any signals of interest without having special decoder rings for each one?

Experiments?

Bob _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb