Hi guys,
Trying to copy Cape-1 without any sucess Do I have the right settings in Mix-W I picked
VHF 9600baud G3RUH (set sample rate 22050Hz)
thanks in advance
73 John G7HIA
John,
Those should be right, though we had problems on the ground right before integration as well. The CC1020* is very sensitive to regulator noise as well as overvoltage, especially at the narrow G3RUH deviation. I have a feeling from the data gathered, that it is seeing both conditions.
Jonathan Wagner
The CC1020* is the transceiver IC that the CAPE-1 communications system is based on.
john heath wrote:
Hi guys,
Trying to copy Cape-1 without any sucess Do I have the right settings in Mix-W I picked
VHF 9600baud G3RUH (set sample rate 22050Hz)
thanks in advance
73 John G7HIA _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
John,
Those are the settings I use. I haven't copied CAPE-1, but this works for AO-51 tlm. Test on AO-51 and if you copy it then it is correctly set up for CAPE-1.
73 Ed - KL7UW
At 02:02 PM 5/2/2007, john heath wrote:
Hi guys,
Trying to copy Cape-1 without any sucess Do I have the right settings in Mix-W I picked
VHF 9600baud G3RUH (set sample rate 22050Hz)
thanks in advance
73 John G7HIA _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
participants (3)
-
Edward Cole -
john heath -
Jonathan Wagner