Nice work, Andrew.
Somebody mentioned the Kenwood TS-790A/E previously (a base unit), but I don't think I see it on your current list.
It's an important addition :)
73,
Mark N8MH
Message: 1 Date: Mon, 1 Jun 2009 18:21:11 -0500 From: Andrew Koenig ke5gdb@gmail.com Subject: [amsat-bb] Re: true duplex radios Cc: amsat-bb@amsat.org Message-ID: 2f52b89b0906011621x4b3e196am67c249935884539f@mail.gmail.com Content-Type: text/plain; charset=UTF-8
Here's my attempt of to update the list of full duplex capable radios. Did I miss anything?
HTs - Icom IC-W2A Icom IC-W31A Icom IC-W32 Icom IC-Z1A Icom IC-X2A (440MHz/1.2GHz) Yaesu FT-470 Yaesu FT-530 Yaesu FR-51R Kenwood TH-D7 Kenwood TH-75A Kenwood TH-77 Kenwood TH-78 Alinco DJ-G5T Alinco DJ-580T Alinco DJ-G7
Mobile rigs - Kenwood TM732 Kenwood TM733 Kenwood TM741 Kenwood TM742 Kenwood TM941 Kenwood TM942 Kenwood TM-D700/710 Yaesu FT-4700 Yaesu FT-5100 Yaesu FT-5200 Yaesu FT-8800 Yaesu FT-8900 Icom 2728H Icom IC2800 Icom IC-2340 Icom IC-2720 Icom IC-2820 Icom IC-Delta-100 Heathkit HW-24/HW-24A
Base rigs - Yaesu FT-726 (with OSCAR Module) Yaesu FT-736 Yaesu FT-847 Kenwood TS-2000 Icom 820 Icom 821 Icom IC-910H Icom IC-970
-- Andrew Koenig KE5GDB
I purchased a kj6ko amp and I'm trying to key it with my 910. I can simply run a ground from the PTT terminal when I want to tx. This isn't recommended but does work. The 910 doesn't have a single purpose amp control connector. Does anyone have an amp working with one of the existing ports on the 910. I don't need T/R switching as I'm just using 1200 mhz for tx only. The TX PTT control on the amp is rated around 7ma and 30v.
73 Jeff kb2m
My amp ptt is wired to pins 2 and 3 of the ACC socket. There are menu settings to tell the radio what bands to close on transmit. It's not easy to gather that this pin does the job from the manual.
73, Drew KO4MA
----- Original Message ----- From: "Jeff KB2M" kb2m@comcast.net To: amsat-bb@amsat.org; ke5gdb@gmail.com Sent: Wednesday, June 03, 2009 7:15 AM Subject: [amsat-bb] 1200 mhz amp PTT
I purchased a kj6ko amp and I'm trying to key it with my 910. I can simply run a ground from the PTT terminal when I want to tx. This isn't recommended but does work. The 910 doesn't have a single purpose amp control connector. Does anyone have an amp working with one of the existing ports on the 910. I don't need T/R switching as I'm just using 1200 mhz for tx only. The TX PTT control on the amp is rated around 7ma and 30v.
73 Jeff kb2m
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
participants (3)
-
Andrew Glasbrenner -
Jeff KB2M -
Mark L. Hammond