Make sure you don't have any audio processors, tone controls or filters turned on such as DSP, noise blankers, etc. It needs to be clean untouched audio to decode properly.  Michael KC4ZVA

From: Mark Lunday wd4elg@outlook.com To: AMSAT BB amsat-bb@amsat.org Sent: Wednesday, April 5, 2017 11:48 AM Subject: [amsat-bb] Help needed with UISS and APRS

I gave up on AGWPE in frustration.  It worked great with my IC-910H, I could not get it to trigger the PTT switch on my Flex 5000, so I switched to the UZ7HO modem included with UISS.

I am able to decode packets and I can trigger the PTT, but it is not being received by any stations.

1.      What mode should I be using on my Flex?  FM simplex with 5 kHz deviation is what I have selected. 2.      What about the antenna? I am using an antenna with significant gain, and this antenna was able to send packets with my IC-910H with ease. 3.      Is there power out?  Yes, measuring 60 watts.

It's something simple...any ideas?

Mark Lunday, WD4ELG Greensboro, NC  FM06be wd4elg@arrl.netmailto:wd4elg@arrl.net http://wd4elg.blogspot.com SKCC #16439  FISTS #17972

_______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb