I have been unable , so far, to get anything from FAST 2 on 145.825 with satpc tracking for doppler. I get a quick carrier keyed up but no packet data. And that is on some pretty good 35+ degree passes. Any help would be appreciated. I am able to hear and get data from FAST 1 fine. Thank es 73 Joe KI4TZ
Joe,
FAST2 is in Safe Mode. You can hear the 9k6 beacon every 2 minute. There is no 1k2 AFSK beacon (in this mode).
73, Mike DK3WN
-----Ursprüngliche Nachricht----- Von: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] Im Auftrag von Joe Barkley Gesendet: Sonntag, 28. November 2010 22:20 An: AMSAT-BB@amsat.org Betreff: [amsat-bb] FAST 2 Help
I have been unable , so far, to get anything from FAST 2 on 145.825 with satpc tracking for doppler. I get a quick carrier keyed up but no packet data. And that is on some pretty good 35+ degree passes. Any help would be appreciated. I am able to hear and get data from FAST 1 fine. Thank es 73 Joe KI4TZ _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Finally was able to get some of the FAST2 9600 baud beacon on 145.825, but had go to PASSALL ON on the KPC-9612. The signal is strong, but there must be some distortion in the transmitter.
Here's what I copied: FA?*-8>BEAE,r-6/2: <<rr0>>:{78 A3 B8 A9 1B 19 9C 69 28 B3 32 90 A6 37 B2 B2 06 75 01 33}
73, Ken, W7KKE CN75xa
participants (3)
-
Joe Barkley -
Ken Swaggart -
Mike Rupprecht