Good morning,
I am hoping someone can help answer a question. I am running SatPC32 12.8a and controlling my Yaesu FT 897 as my uplink radio. Everything works fine except that I cannot get the subtones to update.
I am using the following data in my SubTones.SQF file (as recommended in the help files)
AO-51,67.0,$3F,1 SO-50,67.0,$3F,1 SO-50,74.4,$3E,3 SO-67,233.6,$01,36 HO-68,67.0,$3F,1
I'm running Windows XP and my baud rate is 9600, although I have varied it to see if that would resolve my issue.
Everything thing updates on the radio as it should (including the radio turning the tones 'on' and going into split mode); the only issue is that the tone is not updated, it will stay on the last tone used. For example if I use our local repeater, the radio will still use that tone.
Thanks in advance for any help or ideas.
73
Matt Severin, N8MS
Matt.......my suggestion is to delete version 12a and get the latest version off the website, as I have no problems with v12b. Also, my HO-67 uses the same data, $3F,1 not what you have. See what others say, as dont depend on this old guy, hi.
John W6ZKH
________________________________ From: Matt Severin [email protected] To: [email protected] Sent: Wed, August 4, 2010 4:55:26 AM Subject: [amsat-bb] SatPC32 & Subtones
Good morning,
I am hoping someone can help answer a question. I am running SatPC32 12.8a and controlling my Yaesu FT 897 as my uplink radio. Everything works fine except that I cannot get the subtones to update.
I am using the following data in my SubTones.SQF file (as recommended in the help files)
AO-51,67.0,$3F,1 SO-50,67.0,$3F,1 SO-50,74.4,$3E,3 SO-67,233.6,$01,36 HO-68,67.0,$3F,1
I'm running Windows XP and my baud rate is 9600, although I have varied it to see if that would resolve my issue.
Everything thing updates on the radio as it should (including the radio turning the tones 'on' and going into split mode); the only issue is that the tone is not updated, it will stay on the last tone used. For example if I use our local repeater, the radio will still use that tone.
Thanks in advance for any help or ideas.
73
Matt Severin, N8MS _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
I hate to ask the obvious, but you ARE clicking the "T" button in the upper left section of the SatPC32 screen to turn the subtone on, right? (and on SO-50, clicking a second time to toggle between the two tones if necessary...)
George, KA3HSW
----- Original Message ----
From: Matt Severin [email protected] To: [email protected] Sent: Wed, August 4, 2010 6:55:26 AM Subject: [amsat-bb] SatPC32 & Subtones
Good morning,
I am hoping someone can help answer a question. I am running SatPC32 12.8a and controlling my Yaesu FT 897 as my uplink radio. Everything works fine except that I cannot get the subtones to update.
I am using the following data in my SubTones.SQF file (as recommended in the help files)
AO-51,67.0,$3F,1 SO-50,67.0,$3F,1 SO-50,74.4,$3E,3 SO-67,233.6,$01,36 HO-68,67.0,$3F,1
I'm running Windows XP and my baud rate is 9600, although I have varied it to see if that would resolve my issue.
Everything thing updates on the radio as it should (including the radio turning the tones 'on' and going into split mode); the only issue is that the tone is not updated, it will stay on the last tone used. For example if I use our local repeater, the radio will still use that tone.
Thanks in advance for any help or ideas.
73
Matt Severin, N8MS
Hi George,
Yes I am...and that's how I realized that the subtones weren't updating.
Matt
On Wed, Aug 4, 2010 at 12:47 PM, George Henry [email protected] wrote:
I hate to ask the obvious, but you ARE clicking the "T" button in the upper left section of the SatPC32 screen to turn the subtone on, right? (and on SO-50, clicking a second time to toggle between the two tones if necessary...)
George, KA3HSW
----- Original Message ----
From: Matt Severin [email protected] To: [email protected] Sent: Wed, August 4, 2010 6:55:26 AM Subject: [amsat-bb] SatPC32 & Subtones
Good morning,
I am hoping someone can help answer a question. I am running SatPC32
12.8a
and controlling my Yaesu FT 897 as my uplink radio. Everything works
fine
except that I cannot get the subtones to update.
I am using the following data in my SubTones.SQF file (as recommended in
the
help files)
AO-51,67.0,$3F,1 SO-50,67.0,$3F,1 SO-50,74.4,$3E,3 SO-67,233.6,$01,36 HO-68,67.0,$3F,1
I'm running Windows XP and my baud rate is 9600, although I have varied
it
to see if that would resolve my issue.
Everything thing updates on the radio as it should (including the radio turning the tones 'on' and going into split mode); the only issue is that the tone is not updated, it will stay on the last tone used. For example
if
I use our local repeater, the radio will still use that tone.
Thanks in advance for any help or ideas.
73
Matt Severin, N8MS
Hi Matt,
Just to double check---do you have the sub-tone option turned ON? Check Setup/Options and make sure "Sub-Audio-Tone" is checked...
73,
Mark N8MH
On Wed, Aug 4, 2010 at 7:55 AM, Matt Severin [email protected] wrote:
Good morning,
I am hoping someone can help answer a question. I am running SatPC32 12.8a and controlling my Yaesu FT 897 as my uplink radio. Everything works fine except that I cannot get the subtones to update.
I am using the following data in my SubTones.SQF file (as recommended in the help files)
AO-51,67.0,$3F,1 SO-50,67.0,$3F,1 SO-50,74.4,$3E,3 SO-67,233.6,$01,36 HO-68,67.0,$3F,1
I'm running Windows XP and my baud rate is 9600, although I have varied it to see if that would resolve my issue.
Everything thing updates on the radio as it should (including the radio turning the tones 'on' and going into split mode); the only issue is that the tone is not updated, it will stay on the last tone used. For example if I use our local repeater, the radio will still use that tone.
Thanks in advance for any help or ideas.
73
Matt Severin, N8MS _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Matt, I have sent you an answer off the list. 73s, Erich, DK1TB
----- Original Message ----- From: "Matt Severin" [email protected] To: [email protected] Sent: Wednesday, August 04, 2010 1:55 PM Subject: [amsat-bb] SatPC32 & Subtones
Good morning,
I am hoping someone can help answer a question. I am running SatPC32 12.8a and controlling my Yaesu FT 897 as my uplink radio. Everything works fine except that I cannot get the subtones to update.
I am using the following data in my SubTones.SQF file (as recommended in the help files)
AO-51,67.0,$3F,1 SO-50,67.0,$3F,1 SO-50,74.4,$3E,3 SO-67,233.6,$01,36 HO-68,67.0,$3F,1
I'm running Windows XP and my baud rate is 9600, although I have varied it to see if that would resolve my issue.
Everything thing updates on the radio as it should (including the radio turning the tones 'on' and going into split mode); the only issue is that the tone is not updated, it will stay on the last tone used. For example if I use our local repeater, the radio will still use that tone.
Thanks in advance for any help or ideas.
73
Matt Severin, N8MS _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
participants (5)
-
Erich Eichmann -
George Henry -
John Neeley -
Mark L. Hammond -
Matt Severin