LVB Tracker USB serial port driver for Windows 7 x64?
Has anyone located a driver for the LVB Tracker internal USB to serial port adapter on Windows 7 x64?
If not, has anyone reverted to the serial port connection on LVB Tracker and used an external USB to serial port adapter successfully with SatPC32 on Windows 7 x64?
I have an Edgeport multiple USB to serial port that has drivers for Windows 7 x64 that I will use if I have to. I would prefer using the LVB Tracker with its USB to serial adapter if someone has another solution.
73, Bill NJ1H
In response to my posting yesterday I received one suggestion to use a Vista driver. It did not work.
What did work is the following:
I downloaded the following zip files from http://www.dlpdesign.com/#Drivers .
http://www.dlpdesign.com/cdm20600certified.zip
http://www.dlpdesign.com/cdm20600dlp.zip
I installed the drivers in cdm20600certified.zip but although the driver appeared to install, that was not sufficient.
I then installed the drivers in cdm20600dlp.zip. These are not certified drivers. I ignored the warning. They work fine with SarPC32 so far.
73, Bill NJ1H
Hi Bill,
I found this mention from you on the amsat bulletin board:
"
"I Then installed the drivers in cdm20600dlp.zip. These are not certified drivers. I ignored the warning. They work fine with SarPC32 so far."
I am trying to make the LVBtracker work on W7, but the cdm20600dlp.zip comes up as a dead link.
Do you still have a copy of that zip file you could send to me?
participants (2)
-
Bill Bordy, NJ1H -
Skip Teller