It appears that my G6LVB controller is not driving the G5500 from SatPC32 V12b

I am running WinXP ==> SatPC32 V12b ==> G6LVB interface ==> G5500 rotor. My rotor is not responding to SatPC32. I have successfully used the cmds in the G6LVB instructions with HyperTerminal to drive the rotor. SatPC32 does drive the FT847. I have toggled the SatPC32 screen R+/- without good results. I am using the FTDI USB with the 2.8.2.0 driver to virtual Com Port 6.

As anyone had and solved this problem?

Any help will be appreciated.

Thanks and 73,

Allen WB6RWU