Hi Dave,

The situation is as follows:

All Dashboards will track and decode tlm from any of FUNcube-1, UKube and Nayif1. They will also, without the operator having to take any particular action, upload that data correctly to the data warehouses and these uploads will be correctly recorded on the "Upload Ranking" tab. The use of the "wrong" Dashboard when uploading data to the Warehouse causes the no problems:)

Although the FUNcube dashboard will display data from the other two spacecraft, and vice versa, much of the data is invalid as the tlm sequences and some of the formats are different between the various spacecraft.

We are presently working on two Dashboard upgrades:

A) creating a "Display the tlm ONLY from the satellite specific to the particular Dashboard in use" tickbox to select. This will mean that, for instance, the FUNcube-1 dashboard will not display or store Nayif-1 data. This will ensure that all the graphs etc only relate to FUNcube-1. Again thsi would not stop the software decoding tlm from one of the other spacecraft and forwarding it to the Data Warehouse.

B) creating a single Dashboard which combines all the existing ones into one "unified" version.

We cannot at this time confirm when either of these "upgrades" will be available but we appreciate their importance.....

Thanks for all your support

73

Graham G3VZV

-----Original Message----- From: Dave Remnant Sent: Tuesday, February 21, 2017 10:57 AM To: amsat-bb@amsat.org Subject: [amsat-bb] Automated reception of AO-73, UKUBE-1 & Nayif-1?

Did I read somewhere that all 3 birds, AO-73, UKUBE-1 & Nayif-1 can be decoded on the same dashboard software and the uploads will route themselves correctly?

I have to leave my station automated & at present it's either AO-73 & UKUBE-1 (using the same dashboard) or Nayif-1 on its own dashboard.

I want to support all 3 birds with telemetry reception & upload but don't want to "dump" incorrect data on the wrong server.

Can anyone please clarify the situation & if there is any workaround if a common dashboard can't be used.

I use a FCD & SatPC32.

Thanks

Dave (M0SAT)

_______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb