Once I got the correct Mode-Setting for UO-11, I had no trouble getting what I think are good decode sets. Others here had said UO-11 gives garbage decodes.
The last couple days I have gotten true garbage, a snippet here: -------------------------------------------------------- 0pA}4VRX 4CKIp(zhp#W13 z R<#`{M|4C 2Gr%xa5,RtCX`Xa:#X{ <("!"i(TpB?B$B7(4="BzF<("ai)5H)0L$0\C/~HPT, $"b}EE=0"lw` L`V A-.7Pq\E54,xX|/ab(+F! ^88 (a`h"i!B @, #%\95!!_C$[P`dD &4 XhQHV3& )FPj( rPA4-`}BH!}0PF!/B-.H9)GP0jSDd rI"-<er HbP 9fQyMb3@`1_`TEBfS(!YhyC&a@9Dt%|&8N5U0A.N7TX"@k82!|`FF@PtT!ed@dLtr12^I $#xP"VvIBJ$ --------------------------------------------------------------
So this morning I started fiddling around with the Mode-Settings Charset as-well-as Invert. I walked thru the available Charsets in UISS. Then I toggled Invert for each.
Finally when I got back to Ascii-7 and inverted, it all worked/decoded. ------------------------------------------------------------------------------- 000000010001020002030003040004050005060006070007080008090009 100001110000120003130002140005150004160007170006180009190008 20000221000322000023000124000625000726000427000528000A29000B 30000331000232000133000034000735000636000537000438000B39000A 40000441000542000643000744000045000146000247000348000C49000D 50000551000452000753000654000155000056000357000258000D59000C 60800E615FC1620105633341644402651E0C66200267000168000E69000F UOSAT-2 1408060015554
000000010001020002030003040004050005060006070007080008090009 100001110000120003130002140005150004160007170006180009190008 20000221000322000023000124000625000726000427000528000A29000B 30000331000232000133000034000735000636000537000438000B39000A 40000441000542000643000744000045000146000247000348000C49000D 50000551000452000753000654000155000056000357000258000D59000C 60800E615FC1620105633341644402651E0C66200267000168000E69000F UOSAT-2 1408060015559 --------------------------------------------------------------------------------
I am certain the Mode-Settings were the same from begin with garbage decodes to end when I returned them to original settings.
go figure. 73,
Hi Bob. I copied and decoded UO-11 telemetry for years and used it in my Earth Science classes to show students near earth orbit space conditions. When you said "Others here had said UO-11 gives garbage decodes", they actually meant the telemetry you decode from the tones will look fine like what you included, but when you put the values in the formulas to determine the "real" data, that value will be garbage. You can see the date and time are way off in the header of each frame of 7 lines.
I sent this on Friday at 2:33 PM EDT. You may have 3 replies ahead of me because I never know how long it finally takes to show up on the BB. I do not see any replies at this time. 73, Rick - WB3CSY
On Fri, Jul 31, 2015 at 12:57 PM, Bob KD7YZ [email protected] wrote:
Once I got the correct Mode-Setting for UO-11, I had no trouble getting what I think are good decode sets. Others here had said UO-11 gives garbage decodes.
The last couple days I have gotten true garbage, a snippet here:
0pA}4VRX 4CKIp(zhp#W13 z R<#`{M|4C 2Gr%xa5,RtCX`Xa:#X{ <("!"i(TpB?B$B7(4="BzF<("ai)5H)0L$0\C/~HPT, $"b}EE=0"lw` L`V A-.7Pq\E54,xX|/ab(+F! ^88 (a`h"i!B @, #%\95!!_C$[P`dD &4 XhQHV3& )FPj( rPA4-`}BH!}0PF!/B-.H9)GP0jSDd rI"-<er HbP 9fQyMb3@`1_`TEBfS(!YhyC&a@9Dt%|&8N5U0A.N7TX"@k82!|`FF@PtT!ed@dL tr12^I $#xP"VvIBJ$
So this morning I started fiddling around with the Mode-Settings Charset as-well-as Invert. I walked thru the available Charsets in UISS. Then I toggled Invert for each.
Finally when I got back to Ascii-7 and inverted, it all worked/decoded.
000000010001020002030003040004050005060006070007080008090009 100001110000120003130002140005150004160007170006180009190008 20000221000322000023000124000625000726000427000528000A29000B 30000331000232000133000034000735000636000537000438000B39000A 40000441000542000643000744000045000146000247000348000C49000D 50000551000452000753000654000155000056000357000258000D59000C 60800E615FC1620105633341644402651E0C66200267000168000E69000F UOSAT-2 1408060015554
000000010001020002030003040004050005060006070007080008090009 100001110000120003130002140005150004160007170006180009190008 20000221000322000023000124000625000726000427000528000A29000B 30000331000232000133000034000735000636000537000438000B39000A 40000441000542000643000744000045000146000247000348000C49000D 50000551000452000753000654000155000056000357000258000D59000C 60800E615FC1620105633341644402651E0C66200267000168000E69000F UOSAT-2 1408060015559
I am certain the Mode-Settings were the same from begin with garbage decodes to end when I returned them to original settings.
go figure. 73, -- Bob KD7YZ http://www.qrz.com/db/kd7yz AMSAT LM#901 _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
On 31-Jul-15 1434, Rick Walter wrote:
When you said "Others here had said UO-11 gives garbage decodes", they actually meant the telemetry you decode from the tones will look fine like what you included, but when you put the values in the formulas to determine the "real" data, that value will be garbage.
Well I learn more every day. Thanks for the help and explanation Rick! I'll take it off my list to decode or watch.
73,
You have to use software to decode these blocs of data. The information about the sat: http://www.dk3wn.info/sat/afu/sat_uo11.shtml The software: http://www.dk3wn.info/software.shtml
Good luck 73 Dan ON5UE
-----Oorspronkelijk bericht----- Van: AMSAT-BB [mailto:[email protected]] Namens Bob KD7YZ Verzonden: vrijdag 31 juli 2015 18:58 Aan: AMSAT BB Onderwerp: [amsat-bb] Decoding UO-11 (UOSAT-2)
Once I got the correct Mode-Setting for UO-11, I had no trouble getting what I think are good decode sets. Others here had said UO-11 gives garbage decodes.
The last couple days I have gotten true garbage, a snippet here: -------------------------------------------------------- 0pA}4VRX 4CKIp(zhp#W13 z R<#`{M|4C 2Gr%xa5,RtCX`Xa:#X{ <("!"i(TpB?B$B7(4="BzF<("ai)5H)0L$0\C/~HPT, $"b}EE=0"lw` L`V A-.7Pq\E54,xX|/ab(+F! ^88 (a`h"i!B @, #%\95!!_C$[P`dD &4 XhQHV3& )FPj( rPA4-`}BH!}0PF!/B-.H9)GP0jSDd rI"-<er HbP 9fQyMb3@`1_`TEBfS(!YhyC&a@9Dt%|&8N5U0A.N7TX"@k82!|`FF@PtT!ed@dLtr12^I $#xP"VvIBJ$ --------------------------------------------------------------
So this morning I started fiddling around with the Mode-Settings Charset as-well-as Invert. I walked thru the available Charsets in UISS. Then I toggled Invert for each.
Finally when I got back to Ascii-7 and inverted, it all worked/decoded. ---------------------------------------------------------------------------- --- 000000010001020002030003040004050005060006070007080008090009 100001110000120003130002140005150004160007170006180009190008 20000221000322000023000124000625000726000427000528000A29000B 30000331000232000133000034000735000636000537000438000B39000A 40000441000542000643000744000045000146000247000348000C49000D 50000551000452000753000654000155000056000357000258000D59000C 60800E615FC1620105633341644402651E0C66200267000168000E69000F UOSAT-2 1408060015554
000000010001020002030003040004050005060006070007080008090009 100001110000120003130002140005150004160007170006180009190008 20000221000322000023000124000625000726000427000528000A29000B 30000331000232000133000034000735000636000537000438000B39000A 40000441000542000643000744000045000146000247000348000C49000D 50000551000452000753000654000155000056000357000258000D59000C 60800E615FC1620105633341644402651E0C66200267000168000E69000F UOSAT-2 1408060015559 ---------------------------------------------------------------------------- ----
I am certain the Mode-Settings were the same from begin with garbage decodes to end when I returned them to original settings.
go figure. 73, -- Bob KD7YZ http://www.qrz.com/db/kd7yz AMSAT LM#901 _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
On 01-Aug-15 0544, ON5UE wrote:
You have to use software to decode these blocs of data.
The software: http://www.dk3wn.info/software.shtml
Good luck 73 Dan ON5UE
Excellent, Dan. I ran the program on a recent capture of UO-11 and looking at the numbers in the chart, I "SEE" the wacky values. For example, all temperatures of anything are 96.1 ...
tnx !
73,
participants (3)
-
Bob KD7YZ -
ON5UE -
Rick Walter