Ron, there is audio out on pin 8 but it is a low level output for a TNC, you would have to use a audio amp to kick it up to drive headphones.

73 Kevin WA6FWF

----- Original Message ----- From: "Ronald G. Parsons" [email protected] To: "amsat-bb" [email protected] Sent: Thursday, October 30, 2008 3:01 PM Subject: [amsat-bb] Icom IC-910H audio out on mic connector

I plugged in my Heil headset which I use on my Icom IC-756 into the mic connector on my Icom IC-910H. I got no audio output on the headset with any SET option that seemed to apply.

I reported this to Heil and got the following reply: "Yes, Ron, they removed the RX audio from this one model, and we're not sure why! No menu thing is available, but there may be a jumper or something inside that Icom can help you find. Sorry about this--it caught us by surprise, as well, that they would change this one model."

The schematic shows a signal AFO going to pin-8 of the Mic connector and the pinout on page 15 of the manual shows "AF OUT (varies with [AF]) on pin 8.

Has anyone used the audio output from the mic connector? Was there any "trick?"

Ron W5RKN _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb