Hi, as far as I know CAS-3A (not CAS3A!) is now XW-2A (and CAS-3B is XW-2B). The Doppler.SQF that comes with SatPC32 contains already the following entries for XW-2A: XW-2A,145675.0,435040.0,USB,LSB,REV,0,0,Transponder XW-2A,145640,0,FM,,,0,Digital TLM XW-2A,145660.0,0,USB,,0,CW Beacon The entries #2 and #3 can be chosen in menu  'CAT'.

The Keps files nasa.all  and nasabare.txt contain the Keps for XW-2A.

So, add XW-2A to the list of selected satellites.

73s, Erich, DK1TB

Am 04.09.2019 um 01:21 schrieb RG via AMSAT-BB:

Hello,I made  about 3 contacts on the SSB birds.For the moment I'm running half duplex and I know it's not the best setup,But If I am using as an example CAS3A ,SatPC32 is set at around 435.208 in the doppler .SQF  file.I have the uplink set to track my radio. the downlink is setup for manuel tracking,Would I listen in on 145.880 and move down as the program moves up?I would only be calling CQ and hope someone could tune me in as I try to tune them in.Am I way off here.Thanks in advance.Rich [email protected] _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb