I am getting ready to learn and move to Linux. I currently have a TS-790 and a Yaesu G-5400 rotor. Can it be controlled under Linux? What kind of controller can I get? I may even try to use a KCT board that I have. I have never really had it working, does any one have this working under Linux?
Any help and suggestions would be grateful!!
73 es TNX Will NA2NA telnet://na2na.net AR-Cluster Node
BAD SPELLING :-) Linux is better!!
73 es TNX Will NA2NA telnet://na2na.net AR-Cluster Node
Hi Will,
I have used a KCT with Linux, but it was some time ago.
The driver I used was from f6fbb at ftp://ftp.f6fbb.org/pub/f6fbb/distrib/kct/. It is quite old now, so may need some changes to work with the latest kernels.
I still have a KCT but not a computer I can plug it into. If I get a chance this weekend I will download the driver and see if I can get it installed.
Regards,
John g0orx/n6lyt
William Liporace - NA2NA wrote On 09/06/06 01:29,:
I am getting ready to learn and move to Linux. I currently have a TS-790 and a Yaesu G-5400 rotor. Can it be controlled under Linux? What kind of controller can I get? I may even try to use a KCT board that I have. I have never really had it working, does any one have this working under Linux?
Any help and suggestions would be grateful!!
73 es TNX Will NA2NA telnet://na2na.net AR-Cluster Node _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
participants (2)
-
John Melton -
William Liporace - NA2NA