I need to second Mike Thompson’s request. After an absence of over a year from the birds, I’d love to get back on but time is at a minimum. I’d love to simply be able to update SatPC32 and be ready to go with the new crop of satellites.

I’m running an Icom IC-910 and SatPC32. Fixed elevation, so just a simple azimuth rotor on this end. Pre-amps on the antennas, switched from the rig. It worked well before, hopefully it will again.

If someone can help, I know I’d appreciate (and so would Mike!)

73,

Les Rayburn, N1LF 121 Mayfair Park Maylene, AL EM63nf

From: Mike Thompson <zryder94@gmail.com mailto:zryder94@gmail.com> Subject: [amsat-bb] Returning to the Birds, need SatPC32 files Date: February 21, 2017 at 6:18:27 PM CST To: amsat-bb@amsat.org mailto:amsat-bb@amsat.org

A while back when I was somewhat active on satellites, I found a few of the frequencies in SatPC32 were slightly off, needing a little adjustment here and there. In an effort to get up and running as smoothly as possible, I would like to know if anyone can share their files to enable me to get up and running with the most recent crop of birds.

Specifically looking for Doppler, satfiles, subtone, amsatnames, and celestrak files.

Thanks everyone!