George, Assuming that you already loaded the Icom drivers on the PC and the 2 comm ports show up in your hardware list then setting up SatPC32 should be a breeze, "setup-radio-radio1 "icom" model IC-9100, baud rate 19200, addresses $7C $7C com-port # " the baud rate and addresses are the default for the 9100, if yours are different then of course adjust the values to match your 9100.

I'm guessing you have missed a step somewhere...

73 Kevin wa6fwf

On 4/18/2014 7:02 AM, george hinkle wrote:

I have an Icom 9100 been using if for a good time now. I'm using SatPC32 which works very well with their driver .....if you can get it to work. I did it two years ago but now I have two new computers and can't get it to work now. Any one to help out there? george wi9i

---

Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb