hello george- I have 9600 capable radio (FT8800) connected to sound card via buxcomm interface but I dont know if I can use the same interface with the isolation transformers on 9600. Currently wired for 1200. Waiting to hear from buxcomm about 9600 use. Thanks to mineo for posting the telemetry. I like the graphical flow chart version you used the first time. Its refreshing to see some technical information about echo. Thanks mineo!

73, pat n2oeq

------- Original Message -------

From : George Henry[mailto:ka3hsw@earthlink.net]

Sent : 7/31/2007 9:56:31 PM To : amsat-bb@amsat.org Cc : Subject : RE: [amsat-bb] Re: Echo Telemetry website

If you have a radio with discriminator output (9600 baud packet-ready) and a decent soundcard, you have 9600 capability: download the AGW Packet Engine and AGWTerm from www.elcom.gr/sv2agw and you can receive 9600 baud packet from the satellites. Accurate doppler tuning (read: computer-controlled with very accurate clock setting on the computer) is an absolute MUST.

George, KA3HSW

----- Original Message -----