Help! to install a unsupported receiver in SatPC32
![](https://secure.gravatar.com/avatar/86db222259c9942e1fb799689f8508ba.jpg?s=120&d=mm&r=g)
Has any one installed a IC-R8500 in SatPC32 to control its Freq? Or any other unsupported radio. Any tips would be helpful.
Thanks Charlie K3VDB
![](https://secure.gravatar.com/avatar/6585a5f9921c8edec10b0a1d61a044bb.jpg?s=120&d=mm&r=g)
I'm sure Erich will weigh in here, but I would think that if you went into Radio Setup, ticked the Icom button, then under Model, selected "Others" and under Address, plugged in the correct CI-V address for the R8500, it might work...
George, KA3HSW
----- Original Message ----- From: "Charlie -K3VDB-" [email protected] To: [email protected] Sent: Tuesday, February 05, 2013 7:43 PM Subject: [amsat-bb] Help! to install a unsupported receiver in SatPC32
Has any one installed a IC-R8500 in SatPC32 to control its Freq? Or any other unsupported radio. Any tips would be helpful.
Thanks Charlie K3VDB
participants (2)
-
Charlie -K3VDB-
-
George Henry