Hey BB,
I'm wondering if anyone on the list has experience with PCB printers? I'm interested in learning about your experiences / lessons learned, etc... Wondering specifically about the Nano Dimension Dragonfly or Voltera-V1
Thank You, Joseph Armbruster
We have a Voltera-V1, its okay for small prints, not great for parts with a large surface mount heat sink. Also, so far it seems that we have to create the circuit then use the voltera for soldering too.
On Thu, Jun 16, 2022 at 10:54 AM Joseph Armbruster < josepharmbruster@gmail.com> wrote:
Hey BB,
I'm wondering if anyone on the list has experience with PCB printers? I'm interested in learning about your experiences / lessons learned, etc... Wondering specifically about the Nano Dimension Dragonfly or Voltera-V1
Thank You, Joseph Armbruster
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
I think you are talking about a device that actually prints circuit boards. I have no experience with those. The last PCB I made by hand was with a negative, a UV light and a tub of etching solution.
I have used https://oshpark.com/ with good success. Depending on how big you board is they likely will not be the most inexpensive option. However they are based in the US.
--... ...-- Don KB2YSI
On Thu, Jun 16, 2022, 20:50 Amber Imai-Hong akrimai@hawaii.edu wrote:
We have a Voltera-V1, its okay for small prints, not great for parts with a large surface mount heat sink. Also, so far it seems that we have to create the circuit then use the voltera for soldering too.
On Thu, Jun 16, 2022 at 10:54 AM Joseph Armbruster < josepharmbruster@gmail.com> wrote:
Hey BB,
I'm wondering if anyone on the list has experience with PCB printers? I'm interested in learning about your experiences / lessons learned, etc... Wondering specifically about the Nano Dimension Dragonfly or Voltera-V1
Thank You, Joseph Armbruster
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
participants (3)
-
Amber Imai-Hong -
Don KB2YSI -
Joseph Armbruster