![](https://secure.gravatar.com/avatar/46d34b3d23ecdf1422c34fa05cb4b4e1.jpg?s=120&d=mm&r=g)
Hello,
In the past I was successfully digipeating the ISS using my KPC3+, UISS and AGW Packet engine. After a MB and HD change, I lost the setup. I also lost AGW or at least messed it up, so I downloaded again. On start, I get a 'copyright violation' box and it closes.
So, how can I get past the 'copyright violation' message or is there a better way to digipeat using other programs
Any help appreciated
73, Ted
K7TRK
![](https://secure.gravatar.com/avatar/9e9410e11418b2e5df3fe1fbf969da36.jpg?s=120&d=mm&r=g)
I use DireWolf and UISS for packet via ISS. I've never tried anything else, so I can't say if it's better or not, but it works fine for me.
Steve AI9IN
On 2016-10-18 20:03, Ted wrote:
Hello,
In the past I was successfully digipeating the ISS using my KPC3+, UISS and AGW Packet engine. After a MB and HD change, I lost the setup. I also lost AGW or at least messed it up, so I downloaded again. On start, I get a 'copyright violation' box and it closes.
So, how can I get past the 'copyright violation' message or is there a better way to digipeat using other programs
Any help appreciated
73, Ted
K7TRK
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
participants (2)
-
skristof@etczone.com
-
Ted