You are correct that you need to get the Keps in the same group to display them at the same time. They will eventually migrate, and you can request that from Tim Kelso on his web site to speed the process up.
As for seeing them simultaneously, use Multitrack. First go to Satellites. On the Selected list, use the Show On/Off button to select the ones you want to see simultaneously. There will be an asterisk in front of the name. Exit back to the main page, and click the "M" in the upper left option panel. That will turn on Multitrack.
<-----Original Message----- <From: [email protected] [mailto:[email protected]] On Behalf Of Jim Heck <Sent: Tuesday, July 29, 2014 11:54 AM <To: [email protected] <Subject: [amsat-bb] SAT PC 32 question < <Hi Folks, < < I wish to track two satellites (actually FUNcube and UKube) at the same <time. The TLM for one is in cubesats.txt and the other is in tle-new.txt. < < Is there a way of displaying them both in the main window at the same <time? When I select one, the other is automatically removed from the list. < < I have tired copying the tles for one into the other's file, and this <works OK, but it rather tedious! < < The problem might be resolved when the elements for Ukube are included in <the cubesats.txt file, but they will appear as A and B on the main display <(bottom right hand corner), whereas I would like to display them both on the <map simultaneously. Is there a way of doing this? < <Thanks for any help <73s Jim G3WM < < <_______________________________________________ <Sent via [email protected] Opinions expressed are those of the author. <Not an AMSAT-NA member? Join now to support the amateur satellite program! <Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb