Thanks Nick ----- Original Message ----- From: "Walter Holmes" walterh@k5wh.net To: "'Nick Pugh'" quadpugh@bellsouth.net; amsat-bb@amsat.org Sent: Tuesday, August 29, 2006 8:32 PM Subject: RE: [amsat-bb] help with mixw

With MixW, when you go into the Packet mode, you are in-effect, in converse mode already.

As you don't have the luxury of multiple commands like a normal packet controller.

So as long as you have set your DIGI's path to what you want to use, when you type any text, and hit enter, it will go out as if you were in the Converse mode.

To set your Digis path, follow this path. Mode, Mode Settings, Beacon/Unproto, and set your Digis path.

Best of luck, Walter/K5WH

-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Nick Pugh Sent: Tuesday, August 29, 2006 8:00 PM To: amsat-bb@amsat.org Subject: [amsat-bb] help with mixw

I am using Mixw and would like to send unproto packets and or get into the convers mode. How to you do this in mixw

thanks nick _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb