I was on the 0410 UTC NO-84 pass tonight and saw nobody else.

I was running 5 watts uplink for most of the pass and was able to decode cleanly except at the sub 20 deg elevations.

I tried both the 27’ vertical and G5RV Jr. and they both seemed to do just fine even at my lowest power levels.

I lowered my uplink frequency to 28.119 Mhz and saw myself at 1250 Hz on the audio spectrum.

One change I made was to control my rotor and receive via SatPC32. My Doppler.sqf looks like this:

NO-84,435350,28120,FM,USB,NOR,0,0,Wide FM

NO-84,435350,0,FMN,,,,Narrow FM

I use the first set to get the 28.120 close and manually tune to where I want it then switch to the second one which does not change the uplink Doppler – just the downlink doppler.

Ok, not sure if this helps but I am finding this setup to be very reliable and the satellite seems to have a great RX and very strong downlink. An absolute pleasure to work with.

Thanks,

Brad Schumacher

W5SAT

--- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus