Hi all. FoxTelem reads the available spacecraft at startup. You can change it by adding or removing the spacecraft files. There are two directories to consider:

1) The logfiles folder contains a "spacecraft" folder. Inside there are one or more files ending in ".dat". For each file present FoxTelem loads a spacecraft.

2) The installation folder (where you store the FoxTelem.exe or FoxTelem.jar files) also contains a "spacecraft" folder. This contains all the static data for the spacecraft, such as layouts and lookup tables. There are a set of files that end in ".MASTER". If you copy one of the files ending in .MASTER to the logfile/spacecraft folder and change the extension to ".dat" then it will be added to FoxTelem.

I'm not sure why I made it so complicated, but there is a simpler trick. If you delete all the ".dat" files from the logfiles/spacecraft folder then at startup FoxTelem will again prompt to install spacecraft and you can pick any that you want. It won't delete any of your existing collected data.

By the way, you can also delete ".dat" files from the logfiles/spacecraft folder if you no longer want them, or if like me you run 3 copies of FoxTelem and only want one spacecraft in each. It does not delete your saved telemetry data but it does delete any custom changes you made to the spacecraft, such as narrowing the frequency range.

At some point I'll add a menu option to add or remove spacecaft so we can add in Fox-1E, HuskySat or any others..

73 Chris

On Wed, Jul 25, 2018 at 7:29 PM, Ross Biggar ross.biggar@outlook.com wrote:

hi Paul,

Yes I am using the latest version, it initially started with all the satellites but after I downloaded the first "lot" from AO91, the rest were "lost"

regards

Ross

ZL1WN

---

From: prstoetzer@gmail.com prstoetzer@gmail.com on behalf of Paul Stoetzer n8hm@arrl.net Sent: Thursday, July 26, 2018 2:45:25 AM To: Ross Biggar Cc: amsat-bb@amsat.org Subject: Re: [amsat-bb] Fox Telem program

Ross,

Are you using the latest version of FoxTelem? It should be 1.06r and should include support for all 5 Fox-1 satellites (AO-85, AO-91, AO-92, Fox-1Cliff, and RadFxSat-2 / Fox-1E).

The latest version can be downloaded at http://www.amsat.org/tlm/

73,

Paul, N8HM

On Tue, Jul 24, 2018 at 9:19 PM, Ross Biggar ross.biggar@outlook.com wrote:

...

Hi All,

My Fox telem program is only showing AO-91 how can I get it to show the

other satellites as well such as AO-92, so I can deload the data from that sat .

...

Regards

Ross

ZL1WN _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.

Opinions expressed

...

are solely those of the author, and do not reflect the official views of

AMSAT-NA.

...

Not an AMSAT-NA member? Join now to support the amateur satellite

program!

...

Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb

---

Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb