Hi Jack, please read the WinAOS help file that can opened with the WinAOS "Help" menu.

In the SatPC32 environment WinAOS uses (by default) the same Keps file as SatPC32. So, when you update that Keps file for SatPC32 WinAOS will automatcally use the updated Keps.

When you run WinAOS "stand allone" you can download Keps files, for example nasa.all, with your browser. You will see some download addresses in the SatPC32 "Download Keps" window. In menu "Satellites" click on "Update Keps" to open that window. In your browser open the file as (ascii) text file with, e.g., Wordpad and save it in that format.

To choose a Keps file for WinAOS open menu "File" and navigate to the folder that contains the file. The path and filename will then be saved for later program starts.

With WinAOS you can not specify the altitude of your location. The program gives a quick overview over the rising and setting times. For that purpose the accuracy is fully sufficient.

73s, Erich, DK1TB

----- Original Message ----- From: "Jack Barbera" barberaalderwood@yahoo.com To: "Amsat Reflector" amsat-bb@amsat.org Sent: Sunday, December 12, 2010 8:04 PM Subject: [amsat-bb] timing

Thanks everyone for getting back to me! I did go thru and check the settings for both program and they look good. There are two areas that could be the culprits ,if the WinAos is a sperate program how do I up date the keps? the second area is that I am 205 mtrs about sea level and could not find where to set in the WinAos program if it is necessary/. thanks for any help Jack WA1ZDV _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb