Anyone use this software PacsatGround with a KANTRONICS KPC-9612+ if so please contact Mike [email protected]. I am not able to get this software to talk to my TNC.
____________________________________________________________ Sponsored by https://www.newser.com/?utm_source=part&utm_medium=uol&utm_campaign=...
2 Buffalo Police Officers Are Charged With Assault http://thirdpartyoffers.juno.com/TGL3141/5edbca0817f894a077452st04duc1 Zuckerberg: It's Time I Take a Fresh Look at Things http://thirdpartyoffers.juno.com/TGL3141/5edbca08329454a077452st04duc2 Ivanka Trump Isn't Happy After Getting 'Cancelled' http://thirdpartyoffers.juno.com/TGL3141/5edbca084dc634a077452st04duc3
Mike I tried replying privately but it bounced as "address couldn't be found, or is unable to receive mail".
so here it is again
Hi Mike, I run a 9612+ with pacsatground try this...
Using putty or any other terminal program issue the following
port 2 cd ext/ext fulldup off/on mon off/on maxusers 0/1 int kiss reset
once you enter the reset you will now be in kiss mode and can no longer issue commands
exit your terminal program
now startup pacsatground and you should be in business make sure in pacsatground you turn off toggle out of kiss mode on exit or you will have to go through these steps each time you start it
also I have noticed a bug where you exit pacsatground and the next time you start it says it cannot open the com port I'm thinking it leaves it in a odd state, to fix just go into windows device mgr and disable and then enable the com port and it should now work.
Let me know if this does it for you.
73 Kevin WA7FWF
Kevin,
Let me know any more details on the COM port bug. It should not do that :)
I logged it on github and will try to fix at some point.
73 Chris
On Sat, Jun 6, 2020 at 3:02 PM Kevin via AMSAT-BB [email protected] wrote:
Mike I tried replying privately but it bounced as "address couldn't be found, or is unable to receive mail".
so here it is again
Hi Mike, I run a 9612+ with pacsatground try this...
Using putty or any other terminal program issue the following
port 2 cd ext/ext fulldup off/on mon off/on maxusers 0/1 int kiss reset
once you enter the reset you will now be in kiss mode and can no longer issue commands
exit your terminal program
now startup pacsatground and you should be in business make sure in pacsatground you turn off toggle out of kiss mode on exit or you will have to go through these steps each time you start it
also I have noticed a bug where you exit pacsatground and the next time you start it says it cannot open the com port I'm thinking it leaves it in a odd state, to fix just go into windows device mgr and disable and then enable the com port and it should now work.
Let me know if this does it for you.
73 Kevin WA7FWF
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
participants (3)
-
Chris Thompson -
Kevin -
wb7qxu＠juno.com