I'd appreciate a scan of the article from QST too, please, if anyone has one available. I have just figured out how to order the board. g0sfj at amsat dot org many thanks 73 de andy g0sfj
I sent Andy a copy via private email, per the fair use clause of the copyright law.
73, Jerry N0JY
On 12/27/2012 9:32 AM, andy thomas wrote:
I'd appreciate a scan of the article from QST too, please, if anyone has one available. I have just figured out how to order the board.
g0sfj at amsat dot org
many thanks
73 de andy g0sfj _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Hello Andy and Mike
It is a great CAT interface for satellites. It prevents the constant toggling between VFO A and VFO B while receiving, so you will have a normal reception without "holes" in the signal and it always will prevent burn the preamplifier.
I constructed the interface and made the case using an empty electric tape box. I have tested it on FO-29 and VO-52 and it works Excellent! I use it in my portable operations running half-duplex with my FT-817nd.
I have the following information from the AMSAT NEWS SERVICE (ANS-351).
To order please send the following either by mail or email as follows: + Your name and shipping address + Phone number and email address + Item you are requesting + Enclose a check for the appropriate amount, payable to ARRL ETP, sent to attention of ARRL Education Services
Send orders to: ARRL Education Services, ATTN: Amy Strickland 225 Main Street Newington, CT 06111
Please contact Amy in ARRL Education Services at [email protected] with any questions about ordering. Please contact Mark Spencer at [email protected] with questions about the interface design and specifications.
73 & Happy New Year! Hector, CO6CBF EL92sd
________________________________________ De: [email protected] [[email protected]] En nombre de andy thomas [[email protected]] Enviado el: jueves, 27 de diciembre de 2012 11:32 Para: amsat Asunto: [amsat-bb] Re: FT-817 Sat-CAT Interface Boards and Kits
I'd appreciate a scan of the article from QST too, please, if anyone has one available. I have just figured out how to order the board.
g0sfj at amsat dot org
many thanks
73 de andy g0sfj _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
--- Consulte la Enciclopedia Colaborativa Cubana http://www.ecured.cu/
Thank you Hector and everyone else on the -bb for your help and advice. Best wishes for the New Year 2013 andy g0sfj
________________________________ From: Hector Luis HLMS. Martinez Sis [email protected] To: andy thomas [email protected]; amsat [email protected] Sent: Thursday, 27 December 2012, 17:06 Subject: RE: [amsat-bb] Re: FT-817 Sat-CAT Interface Boards and Kits
Hello Andy and Mike
It is a great CAT interface for satellites. It prevents the constant toggling between VFO A and VFO B while receiving, so you will have a normal reception without "holes" in the signal and it always will prevent burn the preamplifier.
I constructed the interface and made the case using an empty electric tape box. I have tested it on FO-29 and VO-52 and it works Excellent! I use it in my portable operations running half-duplex with my FT-817nd.
I have the following information from the AMSAT NEWS SERVICE (ANS-351).
To order please send the following either by mail or email as follows: + Your name and shipping address + Phone number and email address + Item you are requesting + Enclose a check for the appropriate amount, payable to ARRL ETP, sent to attention of ARRL Education Services
Send orders to: ARRL Education Services, ATTN: Amy Strickland 225 Main Street Newington, CT 06111
Please contact Amy in ARRL Education Services at [email protected] with any questions about ordering. Please contact Mark Spencer at [email protected] with questions about the interface design and specifications.
73 & Happy New Year! Hector, CO6CBF EL92sd
________________________________________ De: [email protected] [[email protected]] En nombre de andy thomas [[email protected]] Enviado el: jueves, 27 de diciembre de 2012 11:32 Para: amsat Asunto: [amsat-bb] Re: FT-817 Sat-CAT Interface Boards and Kits
I'd appreciate a scan of the article from QST too, please, if anyone has one available. I have just figured out how to order the board.
g0sfj at amsat dot org
many thanks
73 de andy g0sfj _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
--- Consulte la Enciclopedia Colaborativa Cubana http://www.ecured.cu/
participants (3)
-
andy thomas -
Hector Luis HLMS. Martinez Sis -
N0JY