Egg beater, ELK, yagi, arrow, Lindenblad
And probably a few others!!
But if you have a modicum of constructional skills try a quadrifilar..It outperforms all of them...
My site is under construction, but as soon as I get it organized, I will post it here...
73, Dave, WB6LLO dguimon1@san.rr.com
Disagree: I learn....
Pulling for P3E...
I can vouch for that
Lindeblad work well on weather satellites for me .
I made a quadrifilar for 1090 MHz once, but it was 100 MHz out when I swept it !
Doh
----- Original Message ----- From: Dave Guimont To: amsat-bb@amsat.org Sent: Monday, December 29, 2008 6:37 AM Subject: [amsat-bb] Egg beater, ELK, yagi, arrow, Lindenblad
And probably a few others!!
But if you have a modicum of constructional skills try a quadrifilar..It outperforms all of them...
My site is under construction, but as soon as I get it organized, I will post it here...
73, Dave, WB6LLO dguimon1@san.rr.com
Disagree: I learn....
Pulling for P3E...
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
------------------------------------------------------------------------------
Internal Virus Database is out of date. Checked by AVG - http://www.avg.com Version: 8.0.176 / Virus Database: 270.10.0/1863 - Release Date: 12/24/2008 11:49 AM
I can vouch for that
Lindeblad work well on weather satellites for me .
I made a quadrifilar for 1090 MHz once, but it was 100 MHz out when I swept it !
Doh
Yes, I know Andrew, when I built the first one about twenty years ago from the plans in the Amateur satellite manual using their dimensions, I built 5 iterations, before I got it flat at 435...But then it scaled perfectly to all other frequencies....
And as near as I could measure, they are all 1.8 or less...The filar length is critical, the bends can be approximated...
73, Dave, WB6LLO dguimon1@san.rr.com
Disagree: I learn....
Pulling for P3E...
participants (2)
-
Andrew Rich
-
Dave Guimont