Re: AO-51 tlmECHO software... supported TNC
Hello Jean-François,
TLMEcho requires a TNC in KISS mode (or, software emulation of KISS mode). Any TNC that can run in KISS mode should work with TLMEcho. If the SCS PTC-IIe can run KISS mode (or emulate it), it should work with TLMEcho.
People can also use MixW and a sound card, since MixW can emulate a TNC in KISS mode.
Another sound card option is to use Willow/Sabins by Douglas KA2UPW. I can't find the links--it was convered in a recent very good article in the AMSAT Journal. There is a bit of information in this Presentation, near the end: http://www.norcalqrp.org/files%5CIntroduction_to_Amateur_Radio_Satellites_Pa...
Douglas--can you please post the links to your software? :) Can't find it via Google...
73,
Mark N8MH _____________
AO-51 tlmECHO software... supported TNC
--------------------------------------------------------------------------------
Subject: [amsat-bb] AO-51 tlmECHO software... supported TNC From: Jean-François Ménard jf.va2ss@xxxxxxxxx Date: Fri, 10 Jul 2009 08:24:13 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma;h=domainkey-signature:received:received:message-id:date:from:user-agent:mime-version:to:subject:content-type:content-transfer-encoding;bh=UURVcSi1Stowa1PCzrL1AxU3Nvi7JvvHPFe/4m7W2P8=;b=Hq4lMjcvd7PmHsgEoFm3t+Xe8A8oyzad7SQ6SkYRabf/saIyJ8c9NGJW+Na3u/6QIlVCyHSo790e4DXagUo/oCcxCPNWhv1qr0raCeiESbDgtpH2nzaydEAfZL+slAP7NFB0gTmJlcFnzHzSPADBVUcDTeXzs7GpS+EtlDHZN8o=
--------------------------------------------------------------------------------
Hi,
Does anybody know if a SCS PTC-IIe TNC could be compatible with tlmECHO software requirements ?
I know that my TNC can decode at 9600 baud, but is there any special concern to know when using such TNC ?
Thanks.
Mark wrote:
Another sound card option is to use Willow/Sabins by Douglas KA2UPW. Douglas--can you please post the links to your software? :)
Point your browser at
http://www.quagliana.com/willow/
and download the executable files (Willow and Sabins) and the Echo coefficients file.
Willow is the sound card modem and Sabins is the Echo telemetry decoder program.
Douglas KA2UPW/5
Douglas,
there is still a difference for the TX A Power value to the TLMEcho software
-> Sabins shows 0.19 watts - TLMEcho shows 0.24 watts (same kiss file, some coeff file)
Which value is correct?
Thanks and 73, Mike DK3WN
-----Ursprüngliche Nachricht----- Von: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] Im Auftrag von dquagliana@aol.com Gesendet: Freitag, 10. Juli 2009 16:13 An: marklhammond@gmail.com; amsat-bb@amsat.org Betreff: [amsat-bb] Re: AO-51 tlmECHO software... supported TNC
Mark wrote:
Another sound card option is to use Willow/Sabins by Douglas KA2UPW. Douglas--can you please post the links to your software? :)
Point your browser at
http://www.quagliana.com/willow/
and download the executable files (Willow and Sabins) and the Echo coefficients file.
Willow is the sound card modem and Sabins is the Echo telemetry decoder program.
Douglas KA2UPW/5
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
participants (3)
-
dquagliana@aol.com
-
Mark L. Hammond
-
Mike Rupprecht