HRD transponder setup help?

andy thomas

11 Apr 2009 11 Apr '09

5:35 a.m.

I'm totally bemused and confused by this. I can't control my up and downlinks (happens to be on on VO-52) with my HRD setup/ IC-910H. It's in sat mode.

I set the centre frequencies in the tx box to 435.250 and rx box for 145.900 and tick the transponder box, and tune manually, but can't hear myself coming back on cw and can't find the sig using the RIT function (+/- 1 KHz).

So keeping the transponder box ticked, I tick the vfo tx to 435.226 and rx to 145.924, can't hear myself, no change with rit, and HRD say I have a 24kHz RX off set. if I click the up icon the vfo freqs change to the freqs set in the transponder box.

There must be something very simple I'm doing wrong here!! Grateful for any support.

73 de andy g0sfj

Show replies by date

Nigel Gunn G8IFF/W8IFF

11 Apr 11 Apr

7:02 a.m.

New subject: [amsat-bb] Ham Radio Deluxe Queries

Wouldn't the numerous HRD queries here be better sent to the (preferably) HRD Forum or HRD Yahoo e-group?

Tim Tapio

7:43 a.m.

New subject: [amsat-bb] Re: Ham Radio Deluxe Queries

I find these of interest since so many folks are using HRD, some new, some old.

73 de Tim, K4SHF LM 2336

-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Nigel Gunn G8IFF/W8IFF Sent: Saturday, April 11, 2009 8:03 AM To: amsat Subject: [amsat-bb] Ham Radio Deluxe Queries

Wouldn't the numerous HRD queries here be better sent to the (preferably) HRD Forum or HRD Yahoo e-group?

-- Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 Amateur Radio G8IFF W8IFF (was KC8NHF), e-mail nigel@ngunn.net www http://www.ngunn.net Member of ARRL, GQRP #11396, QRPARCI #11644, SOC #548, Flying Pigs QRP Club International #385, Dayton ARA #2128, AMSAT-NA LM-1691, AMSAT-UK, MKARS, ALC, GCARES, XWARN _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb

Ben Jackson

10:19 a.m.

New subject: [amsat-bb] Re: Ham Radio Deluxe Queries

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1

Tim Tapio wrote:

...

I find these of interest since so many folks are using HRD, some new, some old.

Then wouldn't it be beneficial for you to join the HRD listserv? ;D

(Personally, I can see it from both angles.)

- -- Ben Jackson - N1WBV - New Bedford, MA bbj <at> innismir.net - http://www.innismir.net/

...PGP SIGNATURE...

-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iQEVAwUBSeC1DAQiWVsfSvVvAQJ/Awf9GRaxXyq+srvqmXBaXRGJUQkqNSKyzJm/ boZvCIBpHkFzDA/+fCnkBreQxwbeb+1GtZWuidOqckEt+y1dd3qIq1vXZUhJDIcO B2r7TtEMmbHrMr0BkCSh7iucEwW7yMcq4XWkyBKwYu5krSDSBXVte9dBY/1J/n2v Y26CvFaOn6CehI8mxH9FBTDhsobfNLMJ67OmRXyxtXkx8t2rNeb5fgxwDxPF2nyi UXQdtKk8MwGy6Zgr0c3t/HUlYTIDEcHQl6bXHcnxw+b4ir6pUv8hV8Hkv3OLuTp6 +fBy6E9Hv2YZNfArjyaoEYKxPvkvk3vjpvetVbmQbjTQUl4ua8fNsw== =TjMs -----END PGP SIGNATURE-----

Nigel Gunn G8IFF/W8IFF

10:25 a.m.

New subject: [amsat-bb] Re: Ham Radio Deluxe Queries

Or go here http://forums.ham-radio.ch/ and read the forum. Definately the best place for answers.

Ben Jackson wrote:

...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1

Tim Tapio wrote:

...
I find these of interest since so many folks are using HRD, some new, some old.

Then wouldn't it be beneficial for you to join the HRD listserv? ;D

(Personally, I can see it from both angles.)

David - KG4ZLB

9:01 a.m.

New subject: [amsat-bb] Re: HRD transponder setup help?

Andy,

This is more or less the same problem that I found with HRD and the Icom 910 over two years ago - it was reported and its on the list to be fixed.

I use SatPC32 now :-D

David

-- David KG4ZLB www.kg4zlb.com andy thomas wrote: > I'm totally bemused and confused by this. I can't control my up and downlinks (happens to be on on VO-52) with my HRD setup/ IC-910H. It's in sat mode. > > I set the centre frequencies in the tx box to 435.250 and rx box for 145.900 and tick the transponder box, and tune manually, but can't hear myself coming back on cw and can't find the sig using the RIT function (+/- 1 KHz). > > So keeping the transponder box ticked, I tick the vfo tx to 435.226 and rx to 145.924, can't hear myself, no change with rit, and HRD say I have a 24kHz RX off set. if I click the up icon the vfo freqs change to the freqs set in the transponder box. > > There must be something very simple I'm doing wrong here!! Grateful for any support. > > 73 de andy g0sfj > > > > > _______________________________________________ > Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. > Not an AMSAT-NA member? Join now to support the amateur satellite program! > Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb > > -- David KG4ZLB www.kg4zlb.com

5696

Age (days ago)

5696

Last active (days ago)

List overview

Download

5 comments

5 participants

tags (0)

participants (5)

andy thomas
Ben Jackson
David - KG4ZLB
Nigel Gunn G8IFF/W8IFF
Tim Tapio