Greetings,
Due to other reasons, I had to re-install SatPC32, a registered version.
I deleted the old SatPC32 first, before installing the version from AMSAT NA,
via internet. The installation seems to be trouble free, and the program is working
fine, as far as I can tell.
The problem encountered is that I cannot get the program to track the radio. Nothing.
There is indication on the CI-V remote cable that the computer port is working. Smal
deflection on the VTVM.
I used a different application, in which the radio scans frequencies. No problems experienced.
I switched from the IC-821H to the IC-910H, and that radio also scanned, eliminating both radios.
I changed CI-V addresses with no avail. Both radios will not track with the SatPC32 program.
Any advice out there? Thanks in advance.
Peter, NH6VB _________________________________________________________________ The New Busy is not the old busy. Search, chat and e-mail from your inbox. http://www.windowslive.com/campaign/thenewbusy?ocid=PID27925::T:WLMTAGL:ON:W...
Peter, I will answer your mail off the list. 73s, Erich, DK1TB
----- Original Message ----- From: "Peter Scheller" nh6vb@msn.com To: "amsat-bb" amsat-bb@amsat.org Sent: Monday, March 22, 2010 10:46 PM Subject: [amsat-bb] SatPC32 with IC-821H / IC-910H
Greetings,
Due to other reasons, I had to re-install SatPC32, a registered version.
I deleted the old SatPC32 first, before installing the version from AMSAT NA,
via internet. The installation seems to be trouble free, and the program is working
fine, as far as I can tell.
The problem encountered is that I cannot get the program to track the radio. Nothing.
There is indication on the CI-V remote cable that the computer port is working. Smal
deflection on the VTVM.
I used a different application, in which the radio scans frequencies. No problems experienced.
I switched from the IC-821H to the IC-910H, and that radio also scanned, eliminating both radios.
I changed CI-V addresses with no avail. Both radios will not track with the SatPC32 program.
Any advice out there? Thanks in advance.
Peter, NH6VB
The New Busy is not the old busy. Search, chat and e-mail from your inbox. http://www.windowslive.com/campaign/thenewbusy?ocid=PID27925::T:WLMTAGL:ON:W... _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Hi Erich
I now have almost the same problem.
I had version 11.4 on my COMPAQ laptop running windows XP. I have been using it with an interface to tune my Yaesu FT-736R particularly for mode L and S on AO-51. It has worked well for several years. But every year when I renewed my AMSAT-NA membership I ordered a CD with the latest SatPC32 version. As 11.4 worked for what I wanted I never upgraded.
However the other day in deleting old keps from the file I accidently deleted something else and I lost the map dissplay. So I decided it was time to upgrade.
I deleted version 11.4. While deleting a message came up 4 or 5 times about it being linked or associated with other progams and did I want them removerd. As it indicated there would be no problem if they remained I hit NO.
I installed version 12.6 and everything runs all OK except there is no signal out of the RS232 port when C+ is on.
I have selected the 736R rx and baud rate of 4800 Com-port is 0 and CAT delay is 20 and checked CAT control.
I am not too good on computer operation so will need fairly detailed help.
Clare VE3NPC
----- Original Message ----- From: "Erich Eichmann" erich.eichmann@t-online.de To: "Peter Scheller" nh6vb@msn.com Cc: amsat-bb@amsat.org Sent: Tuesday, March 23, 2010 3:08 AM Subject: [amsat-bb] Re: SatPC32 with IC-821H / IC-910H
Peter, I will answer your mail off the list. 73s, Erich, DK1TB
----- Original Message ----- From: "Peter Scheller" nh6vb@msn.com To: "amsat-bb" amsat-bb@amsat.org Sent: Monday, March 22, 2010 10:46 PM Subject: [amsat-bb] SatPC32 with IC-821H / IC-910H
Greetings,
Due to other reasons, I had to re-install SatPC32, a registered version.
I deleted the old SatPC32 first, before installing the version from AMSAT NA,
via internet. The installation seems to be trouble free, and the program is working
fine, as far as I can tell.
The problem encountered is that I cannot get the program to track the radio. Nothing.
participants (3)
-
Clare Fowler -
Erich Eichmann -
Peter Scheller