I found it. Thank you.
CC: [email protected]; [email protected]; [email protected]; [email protected] From: [email protected] Subject: Re: [amsat-bb] Re: A reminder - Say "Hi" to Juno Date: Tue, 8 Oct 2013 15:19:34 -0400 To: [email protected]
Click "How do I participate" at the link, and it's all there.
73, Drew KO4MA
Sent from my iPhone
On Oct 8, 2013, at 3:01 PM, george abbott [email protected] wrote:
What are the tx and receive frequencies. The link did not provide any useful information!
From: [email protected] To: [email protected]; [email protected]; [email protected] Date: Tue, 8 Oct 2013 13:12:12 -0500 Subject: [amsat-bb] A reminder - Say "Hi" to Juno
Say "Hi" to Juno
NASA's Juno spacecraft will fly past Earth on October 9, 2013 to receive a gravity assist from our planet, putting it on course for Jupiter. To celebrate this event, the Juno mission is inviting amateur radio operators around the world to say "HI" to Juno in a coordinated Morse Code message. Juno's radio & plasma wave experiment, called Waves, should be able to detect the message if enough people participate. So please join in, and help spread the word to fellow amateur radio enthusiasts!
http://www.jpl.nasa.gov/hijuno/
Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Beam headings are at
http://www.jpl.nasa.gov/hijuno/pdf/Juno_EFB_Waves_Ham_Radio_Headings_00.pdf
73 Trevor M5AKA
On 10/8/2013 5:38 PM, M5AKA wrote:
Beam headings are at
http://www.jpl.nasa.gov/hijuno/pdf/Juno_EFB_Waves_Ham_Radio_Headings_00.pdf
For the truly geeky, edit the text below for your location, and send to JPL. Ephemeris should be in your inbox in a minute or two.
-Joe KM1P
!$$SOF (ssd)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
! JPL/Horizons Execution Control Example ! For Radio Amateurs in the Say HI to Juuo experiment
! Edit SITE_COORD below for your location. Values are ! east longitude (negative for west longitude), latitude ! (negative south of the equator), and height above sea ! level in km. Given the range of Juno and the wide beam- ! widths of our antennas, a height of 0 should suffice. ! The values below are for Boston, Massachusetts USA. ! E-mail to [email protected] with subject "JOB"
!+++++++++++++++++++++++++++++++++++++++++++++++++++ ! NOTE: First line in this file must start !$$SOF ! Last line in this file must start !$$EOF ! Assigned values should be in quotes !+++++++++++++++++++++++++++++++++++++++++++++++++++
SITE_COORD = '-71.1,42.3,0' COMMAND = '-61' CENTER = 'coord' START_TIME = '2013-OCT-09 00:00' STOP_TIME = '2013-OCT-10 00:00' STEP_SIZE = '5 min' QUANTITIES = '4,20' RANGE_UNITS = 'KM'
!$$EOF~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The turnaround time was lightning fast. Thanks for the tip. Glenn AA5PK
----- Original Message ----- From: "Joe Fitzgerald" [email protected] To: [email protected] Sent: Wednesday, October 09, 2013 6:47 AM Subject: [amsat-bb] Re: A reminder - Say "Hi" to Juno
On 10/8/2013 5:38 PM, M5AKA wrote:
Beam headings are at
http://www.jpl.nasa.gov/hijuno/pdf/Juno_EFB_Waves_Ham_Radio_Headings_00.pdf
For the truly geeky, edit the text below for your location, and send to JPL. Ephemeris should be in your inbox in a minute or two.
-Joe KM1P
!$$SOF (ssd)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
! JPL/Horizons Execution Control Example ! For Radio Amateurs in the Say HI to Juuo experiment
! Edit SITE_COORD below for your location. Values are ! east longitude (negative for west longitude), latitude ! (negative south of the equator), and height above sea ! level in km. Given the range of Juno and the wide beam- ! widths of our antennas, a height of 0 should suffice. ! The values below are for Boston, Massachusetts USA. ! E-mail to [email protected] with subject "JOB"
!+++++++++++++++++++++++++++++++++++++++++++++++++++ ! NOTE: First line in this file must start !$$SOF ! Last line in this file must start !$$EOF ! Assigned values should be in quotes !+++++++++++++++++++++++++++++++++++++++++++++++++++
SITE_COORD = '-71.1,42.3,0' COMMAND = '-61' CENTER = 'coord' START_TIME = '2013-OCT-09 00:00' STOP_TIME = '2013-OCT-10 00:00' STEP_SIZE = '5 min' QUANTITIES = '4,20' RANGE_UNITS = 'KM'
!$$EOF~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ _______________________________________________ Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
participants (4)
-
george abbott -
Glenn AA5PK -
Joe Fitzgerald -
M5AKA