Just worked HR9/N5AFV in EK66, on an island just off the north coast of Honduras. This is quite the warm welcome to working sat's thats for sure! I think he was experiencing some microphone difficulty, as after I worked him N9EAW attempted to work him and all that was sent after EAW's calls were short carriers, with a blip of audio. I hope he gets this fixxed.. as I know many many people would love to work him there.
I cant wait for the HEO's! Working DX is soo much fun! Especially on the sats!
-Steve Raas N2JDQ FN20vg AMSAT 36396
running version 12.5
under setup > rotor setup - where is uni-trac hidden?
Hello John, the Unitrac can not be chosen in the menu "Rotor Setup" like the other rotor interfaces and controllers can. It interfaces with SatPC32 but not like the other interfaces and controllers which utilize the antenna positions calculated by SatPC32. Unitrac and SatPC32 interface that way that you can select or change a satellite in SatPC32 and Unitrac will follow, but it will use it's own calculation and steering functions.
I will forward an older correspondence with a separate mail off the list to you which contains detailed information regarding Unitrac/SatPC32.
73s, Erich, DK1TB
----- Original Message ----- From: "John Becker" w0jab@big-river.net To: amsat-bb@amsat.org Sent: Tuesday, January 30, 2007 10:17 PM Subject: [amsat-bb] SatPC32 question
running version 12.5
under setup > rotor setup - where is uni-trac hidden?
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
participants (3)
-
Erich Eichmann -
John Becker -
sraasï¼ optonline.net