Tim,
I'm using an Easy Rotor Controller model ERC-R. http://easy-rotor-control.com/
Dave - KB1PVH
Sent from my Verizon Wireless DROID X On Jun 2, 2011 6:09 PM, "Tim Tuck" timt@skybase.net wrote:
Tim and all,
I'm starting to think I may have had a fantasy about rotor control...I have a NIB Kenpro KR-5400A,(full az/el) which I have assumed could be controlled directly by the SAT program in HRD without any other interface except the controller that comes with the Kenpro. Is that not so? (I have not yet installed the rotor, so no big deal ...yet)
Hmmmm...Ted, K7TRK
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Dave Webb KB1PVH Sent: Thursday, June 02, 2011 4:05 PM To: Tim Tuck Cc: amsat-bb@amsat.org Subject: [amsat-bb] Re: Rotator Control units
Tim,
I'm using an Easy Rotor Controller model ERC-R. http://easy-rotor-control.com/
Dave - KB1PVH
Sent from my Verizon Wireless DROID X On Jun 2, 2011 6:09 PM, "Tim Tuck" timt@skybase.net wrote: _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
Everyone, What is a normal setup, there is an interface unit that goes in-between the computer and the rotor control. I have a Yaesu G5400 that has the DIN plug in the rear that directly connects to the "LVB Tracker box" that I purchased from AMSAT (a fundraiser for them and available for sale on their website). It is easy to hook up and directly connects to many rotor software products- The SATPC32 that AMSAT sells not only controls your rotor but it will control your Doppler correction if you use it to tune your radio via another port. Check the web for other devices and schemes to control rotors. 73, Dee, NB2F
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Ted Sent: Thursday, June 02, 2011 7:42 PM To: 'Dave Webb KB1PVH'; 'Tim Tuck' Cc: amsat-bb@amsat.org Subject: [amsat-bb] Re: Rotator Control units
Tim and all,
I'm starting to think I may have had a fantasy about rotor control...I have a NIB Kenpro KR-5400A,(full az/el) which I have assumed could be controlled directly by the SAT program in HRD without any other interface except the controller that comes with the Kenpro. Is that not so? (I have not yet installed the rotor, so no big deal ...yet)
Hmmmm...Ted, K7TRK
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Dave Webb KB1PVH Sent: Thursday, June 02, 2011 4:05 PM To: Tim Tuck Cc: amsat-bb@amsat.org Subject: [amsat-bb] Re: Rotator Control units
Tim,
I'm using an Easy Rotor Controller model ERC-R. http://easy-rotor-control.com/
Dave - KB1PVH
Sent from my Verizon Wireless DROID X On Jun 2, 2011 6:09 PM, "Tim Tuck" timt@skybase.net wrote: _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
participants (3)
-
Dave Webb KB1PVH
-
Dee
-
Ted