Can anyone confirm that Cape 1 sends a combination of 9600 packet and CW transmissions?
_http://ulcape.org/wiki/CAPE1_Telemetry_ (http://ulcape.org/wiki/CAPE1_Telemetry)
I don't have 9600 but I can do CW !
Lets hope the launch delay is not too long
Regards
David G0MRF
G0MRF@aol.com wrote:
Can anyone confirm that Cape 1 sends a combination of 9600 packet and CW transmissions?
_http://ulcape.org/wiki/CAPE1_Telemetry_ (http://ulcape.org/wiki/CAPE1_Telemetry)
I don't have 9600 but I can do CW !
Lets hope the launch delay is not too long
Regards
David G0MRF
David,
During normal modes of operation, CAPE-1 will transmit a CW telemetry beacon once a minute with a 9600 baud transmission, also once a minute but interleaved with the CW. So, CAPE-1 will transmit a CW beacon and then 30 seconds later transmit a series of 9600 baud AX.25 packets. During low power modes the satellite will first drop out high speed packets (CW only with a one minute spacing) and later start spacing out the CW beacon. As per http://ulcape.org/wiki/CAPE1_Telemetry it will take three CW beacons or one high speed transmission to get a complete health "snapshot" of the satellite and we will appreciate anyone copying CW.
Jonathan Wagner, KE5FSG
Hi ALL Yes CAPE I sends both CW and AX.25 at 9600 baud. The predominant mode is CW
nick ----- Original Message ----- From: G0MRF@aol.com To: bklofas@calpoly.edu; amsat-bb@amsat.org Sent: Monday, March 26, 2007 4:35 PM Subject: [amsat-bb] Re: Upcoming Cubesat Launch
Can anyone confirm that Cape 1 sends a combination of 9600 packet and CW transmissions?
_http://ulcape.org/wiki/CAPE1_Telemetry_ (http://ulcape.org/wiki/CAPE1_Telemetry)
I don't have 9600 but I can do CW !
Lets hope the launch delay is not too long
Regards
David G0MRF
Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
participants (3)
-
G0MRF＠aol.com -
Jonathan Wagner -
Nick Pugh