Hi to all
Any one knows how to add keps in satpc32 ?
Best 73 !
Pedro Cruz - CU2JX
Any one knows how to add keps in satpc32 ?
Sure, very easy Pedro, just look at the instructions, the format is described very well....
73, Dave, WB6LLO [email protected]
Disagree: I learn....
Pulling for P3E...
Dear All,
I'm Yuta Araki at Nihon University (JQ1YGV). As you may know well, our CubeSat "SEEDS"(shiizu) will be launched on April 28th by the PSLV-C9
rocket from Indian SHAR.
Launch date and time: April 28th at 03:53 UTC.
Expected TLE of "SEEDS": SEEDS 1 XXXXXU 08XXXXXU 08119.17465972 .00000000 00000-0 00000-0 0 0000X 2 XXXXX 97.9533 178.9040 0004500 6.0427 209.0053 14.7954000000001X
The transmitter is as follows: CW morse code sigunal is 437.485MHz, output power is 110mW. FM packet of AFSK AX.25 is 437.485MHz, output power is 450mW.
"SEEDS" uses amature radio band. We would appreciate it if you receive the signal from "SEEDS". You can send us the received data via email [email protected].
The details can be seen at Nihon Unniversity CubeSat Project Web Site http://cubesat.aero.cst.nihon-u.ac.jp/english/index.html or SEEDS Weblog http://cubesat.aero.cst.nihon-u.ac.jp/english/blog.html
If you have anything to ask, please contact me or send email to [email protected]
Best regards, Yuta Araki
_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/ Nakamura&Miyazaki Lab., Department of Aerospace Engineering, Graduate School of Science and Technology, Nihon University Yuta Araki Email: [email protected] _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
Dear All,
I'm Yuta Araki at Nihon University (JQ1YGV).
I made a mistake email address which you can send us the received data via email. I meant "[email protected]".
My sincere apologies for not providing you with the right information
Best regards, Yuta Araki
_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/ Nakamura&Miyazaki Lab., Department of Aerospace Engineering, Graduate School of Science and Technology, Nihon University Yuta Araki Email: [email protected] _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Yuta Araki Sent: Saturday, April 26, 2008 6:33 PM To: [email protected] Subject: [amsat-bb] Launch of CubeSat "SEEDS"
Dear All,
I'm Yuta Araki at Nihon University (JQ1YGV). As you may know well, our CubeSat "SEEDS"(shiizu) will be launched on
April
28th by the PSLV-C9
rocket from Indian SHAR.
Launch date and time: April 28th at 03:53 UTC.
Expected TLE of "SEEDS": SEEDS 1 XXXXXU 08XXXXXU 08119.17465972 .00000000 00000-0 00000-0 0 0000X 2 XXXXX 97.9533 178.9040 0004500 6.0427 209.0053 14.7954000000001X
The transmitter is as follows: CW morse code sigunal is 437.485MHz, output power is 110mW. FM packet of AFSK AX.25 is 437.485MHz, output power is 450mW.
"SEEDS" uses amature radio band. We would appreciate it if you receive the signal from "SEEDS". You can send us the received data via email [email protected].
The details can be seen at Nihon Unniversity CubeSat Project Web Site http://cubesat.aero.cst.nihon-u.ac.jp/english/index.html or SEEDS Weblog http://cubesat.aero.cst.nihon-u.ac.jp/english/blog.html
If you have anything to ask, please contact me or send email to [email protected]
Best regards, Yuta Araki
_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/ Nakamura&Miyazaki Lab., Department of Aerospace Engineering, Graduate School of Science and Technology, Nihon University Yuta Araki Email: [email protected] _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
Sent via [email protected]. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
On Sat, Apr 26, 2008 at 12:22 AM, Dave Guimont [email protected] wrote:
Any one knows how to add keps in satpc32 ?
Sure, very easy Pedro, just look at the instructions, the format is described very well....
I think Pedro might be referring to adding keps to an existing keps file by manually pasting from the clipboard. Downloading and updating a keps file is well described in the SatPC32 manual, but I always have to dig around to find the actual files to manipulate with a text editor.
Here's what I do:
1. Under the 'Satellites' menu, select and recently update a text file.
2. Go to the SatPC32/Kepler directory to find the text file by the same name as the one you selected in step 1.
3. Open that file with a text editor such as notepad and carefully append the new Keps. Save this file.
4. Restart SatPC32.
For new satellites, you might want to include a new line in SatPC32/DOPPLER.SQF to make use of doppler tuning.
73, Bruce VE9QRP
participants (4)
-
Bruce Robertson -
Dave Guimont -
Pedro Cruz -
Yuta Araki