Hi  George,

I have found that as I have added additional software programs to work with HRD, such as N1MM Logger and HDSDRplay, I have had to install Virtual Serial Ports Emulator and run the Splitter function. It creates a number of virtual serial ports that I can connect HRD, N1MM and HDSDR without any conflict. On my system I point VSPE to COM 4 and then have created a virtual serial port at COM 20. HRD, N1MM and HDSDR and then connected to COM 20 and they all work fine. Give that a try and see if it helps. Good luck!

73,

Bob N6REK

On 1/25/2019 4:48 PM, George Sakai via AMSAT-BB wrote:

Hi All, I have just installed Ham Radio Deluxe in my Windows 10 computer which I use for SatPC32.  My radio is IC-9100.   The computer has two COM ports.  One is used for SatPC32 and I designated the second COM port for the Ham Radio Deluxe.  But, the Ham Radio Deluxe does not connect to IC-9100.  What am I doing wrong?  Appreciate any help. 73, George N3GS, EM28 in Kansas _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb

Trying to understand the problem... do you use both at the same time?

If so, two COM ports cannot talk to one radio at the same time.  If not let us know why/how you plan to use the two apps.

(BTW, I have both apps on my PC but I use only one at a time and both are configured to use the same COM port that connects to the radio)

Umesh k6vug

On Friday, January 25, 2019, 4:48:58 PM PST, George Sakai via AMSAT-BB [email protected] wrote:

Hi All, I have just installed Ham Radio Deluxe in my Windows 10 computer which I use for SatPC32.  My radio is IC-9100.   The computer has two COM ports.  One is used for SatPC32 and I designated the second COM port for the Ham Radio Deluxe.  But, the Ham Radio Deluxe does not connect to IC-9100.  What am I doing wrong?  Appreciate any help. 73, George N3GS, EM28 in Kansas _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb

George, If I understand correctly you can only run one tracking program off of USB1 directly not both. USB2 is used for other functions as set by menu 63. See the manual: Two COM port numbers are assigned to the [USB] connector. One of them is “USB1,” used for cloning and CI-V operation. The other one is “USB2,” whose function is selected in “USB2/DATA1 Func” (63) item of the Set mode. (p. 167 of the manual) I wonder if you can use a port splitter like VSPE to use two tracking programs off the came CI-V port. Not sure if that would even work or not. 73, Adrian AA5UK

On Monday, January 28, 2019, 2:32:25 PM CST, Michael Carper, Ph.D. via AMSAT-BB [email protected] wrote:

What version of Ham Radio Deluxe are you using?

Mike, WA9PIE HRD Software, LLC

On Fri, Jan 25, 2019 at 6:48 PM George Sakai via AMSAT-BB < [email protected]> wrote:

Hi All, I have just installed Ham Radio Deluxe in my Windows 10 computer which I use for SatPC32.  My radio is IC-9100.  The computer has two COM ports. One is used for SatPC32 and I designated the second COM port for the Ham Radio Deluxe.  But, the Ham Radio Deluxe does not connect to IC-9100.  What am I doing wrong?  Appreciate any help. 73, George N3GS, EM28 in Kansas _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb

_______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb

I've been struggling with a 9100 and HRD, and finally got it working reliably with a CT-17 USB->CI-V adapter at 19,200.

My only trouble now is something that a lot of people discuss - I can only get it to adjust one VFO at a time, despite the setting in 'Radio Options' that is designed for the 9100.

Has anyone successfully gotten HRD to manipulate both VFO? I do not want to use two radios or two different software programs if I can help it.

Thank you,

KK6ZHZ

- Eli Caul

Director of Customer Care Sonic 707-237-6201 Direct 707-521-0131 Faxline

-----Original Message----- From: AMSAT-BB [email protected] On Behalf Of David W0DHB Sent: Tuesday, January 29, 2019 16:23 To: 'Bob Keating' [email protected]; [email protected] Subject: Re: [amsat-bb] SatPC32 and Ham Radio Deluxe

One of the 9100 serial ports is for CI-V and the other is for Radio Cloning, etc

Bob's suggestion is spot on. You can find VSPE at http://www.eterlogic.com/Products.VSPE.html

-----Original Message----- From: AMSAT-BB [email protected] On Behalf Of Bob Keating Sent: Saturday, January 26, 2019 13:29 To: [email protected] Subject: Re: [amsat-bb] SatPC32 and Ham Radio Deluxe

Hi George,

I have found that as I have added additional software programs to work with HRD, such as N1MM Logger and HDSDRplay, I have had to install Virtual Serial Ports Emulator and run the Splitter function. It creates a number of virtual serial ports that I can connect HRD, N1MM and HDSDR without any conflict. On my system I point VSPE to COM 4 and then have created a virtual serial port at COM 20. HRD, N1MM and HDSDR and then connected to COM 20 and they all work fine. Give that a try and see if it helps. Good luck!

73,

Bob N6REK

On 1/25/2019 4:48 PM, George Sakai via AMSAT-BB wrote:

Hi All, I have just installed Ham Radio Deluxe in my Windows 10 computer which I use for SatPC32. My radio is IC-9100. The computer has two COM ports. One is used for SatPC32 and I designated the second COM port for the Ham Radio Deluxe. But, the Ham Radio Deluxe does not connect to IC-9100. What am I doing wrong? Appreciate any help. 73, George N3GS, EM28 in Kansas _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb

_______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb

_______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb