Dear all,
Please we have an icom-9100 connected to an antenna yagi which is controlled by GS-550 auto-tracker. My objective is to track satellites, I tried to read signals from the radio through the usb interface but always I received only noise even when disconnecting the usb and listening to the icom. I would like to read signals from satellites though the UHF band. I bought HRD software but always had the same problem. Please what can I do? Is there any online service or a freelancer that can assist me? Thank you.
kind regards Kais
Start small and debug each sub-system. For example, manually point your antenna at a repeater. Can you talk through your radio to the repeater? Can you hear the repeater?
If yes, then compare where your antennas are pointing when a satellite is coming over to another source like an app on your phone. Do they match? Are your antennas really pointing at the satellite?
-David, N9KT
On Tue, Apr 6, 2021 at 1:00 PM belwafi kais kaisbelwafi@gmail.com wrote:
Dear all,
Please we have an icom-9100 connected to an antenna yagi which is controlled by GS-550 auto-tracker. My objective is to track satellites, I tried to read signals from the radio through the usb interface but always I received only noise even when disconnecting the usb and listening to the icom. I would like to read signals from satellites though the UHF band. I bought HRD software but always had the same problem. Please what can I do? Is there any online service or a freelancer that can assist me? Thank you.
kind regards Kais
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
So don’t loose heart, I have been trying for most of lockdown to get a contact and achieved my first only yesterday on so-50.
Stephen G6SGA Qrz dot com
Sent from my iPhone
On 6 Apr 2021, at 18:15, David Spoelstra davids@mediamachine.com wrote:
Start small and debug each sub-system. For example, manually point your antenna at a repeater. Can you talk through your radio to the repeater? Can you hear the repeater?
If yes, then compare where your antennas are pointing when a satellite is coming over to another source like an app on your phone. Do they match? Are your antennas really pointing at the satellite?
-David, N9KT
On Tue, Apr 6, 2021 at 1:00 PM belwafi kais kaisbelwafi@gmail.com wrote: Dear all,
Please we have an icom-9100 connected to an antenna yagi which is controlled by GS-550 auto-tracker. My objective is to track satellites, I tried to read signals from the radio through the usb interface but always I received only noise even when disconnecting the usb and listening to the icom. I would like to read signals from satellites though the UHF band. I bought HRD software but always had the same problem. Please what can I do? Is there any online service or a freelancer that can assist me? Thank you.
kind regards Kais
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
Did you install the usb driver? If not make sure that is done first. What signals are you trying to pick up? Voice or digital? If digital you probably want something like UZ7ZHO sound modem. There are many videos on the internet on how to set that up. Perhaps you can provide more details. 73, Adrian AA5UK
Sent from Yahoo Mail on Android
On Tue, Apr 6, 2021 at 12:00 PM, belwafi kaiskaisbelwafi@gmail.com wrote: Dear all, Please we have an icom-9100 connected to an antenna yagi which is controlled by GS-550 auto-tracker. My objective is to track satellites, I tried to read signals from the radio through the usb interface but always I received only noise even when disconnecting the usb and listening to the icom. I would like to read signals from satellites though the UHF band. I bought HRD software but always had the same problem. Please what can I do? Is there any online service or a freelancer that can assist me?Thank you. kind regardsKais -----------------------------------------------------------
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
Yes of course I installed the driver and it worked perfectly. I control the icom-9100 from the software and the received signals are passed correctly from the usb to the soundmodem because there is variation on the waterfall when I change the mode of the receiver and when I received signals.
Le mar. 6 avr. 2021 à 21:13, Adrian Engele aa5uk@yahoo.com a écrit :
Did you install the usb driver? If not make sure that is done first.
What signals are you trying to pick up? Voice or digital? If digital you probably want something like UZ7ZHO sound modem. There are many videos on the internet on how to set that up.
Perhaps you can provide more details.
73, Adrian AA5UK
Sent from Yahoo Mail on Android https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature
On Tue, Apr 6, 2021 at 12:00 PM, belwafi kais kaisbelwafi@gmail.com wrote: Dear all,
Please we have an icom-9100 connected to an antenna yagi which is controlled by GS-550 auto-tracker. My objective is to track satellites, I tried to read signals from the radio through the usb interface but always I received only noise even when disconnecting the usb and listening to the icom. I would like to read signals from satellites though the UHF band. I bought HRD software but always had the same problem. Please what can I do? Is there any online service or a freelancer that can assist me? Thank you.
kind regards Kais
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Acceptable Use and Privacy Policies available at https://www.amsat.org/about-amsat/
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
participants (4)
-
Adrian Engele -
belwafi kais -
David Spoelstra -
Stephen Thornber