Hi Myles,

I use the LVB + G5500 and it works well. I have mine set up with the G5500 as a North stopping rotator, and have it set for 360 degrees max az. I also just used the front buttons on the LVB to program it, found it much easier following the on-screen menu prompts than entering FEN/FEE/FW commands via PC prompt.

73 de Dave KB5WIA

On Tue, Nov 29, 2011 at 3:33 AM, myles landstein myles.landstein@gmail.com wrote:

Would greatly appreciate   some help trying to set up my LVB and Yaesu  G5500 Had  just a few    questions as to  the set up types  I should  use for the LVB settings:

...

...

is  this rotor considered

a  360 degree max az rotor  or 450   South CCW = FEN

or

450North CCW = FEE

second question:

is this  considered

a South CCW stopping rotator,   ‘F’, ‘S’,  .

or

...

...

For a North CCW stopping rotator (default),   ‘F’, ‘N’,  .

...

...

thanks

cc      amsat-bb@amsat.org date    Sat, Nov 26, 2011 at 9:18 PM subject Re: [amsat-bb] Re: quick LVB cal question mailed-by       gmail.com        Important mainly because of the people in the conversati

thanks  very much  for   trying to help  unfortunately  it  really wasn't what  I asked.

hope someone out there might be able  to help a  newbie out

thanks

N2EHG Myles

• Show quoted text -

---

Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb