How to get SDR# to doppler correct SDR from Orbitron
Here is a how to to get Falsconsat-3 with a Airspy Mini
1. Download and install orbitron as usual 2. Download the My DDE client from the orbitron site 3. Place the MyDDE files into the orbitron directory 4. Download an older version of SDR# < 1400 5. Download the satellite tracker plugin and place in sdr# directory 6. Modify the orbitron config file 7. Modify the Plugins.xml for SDR#
Run up orbitron and sdr# ( old version ) and select "SDRSharp" from the Radio / Rotor DDE selection.
The key is to get an OLD version of SDR#
8. Install Virtual Audio Cable 9. Install UZ7HO High Speed 9600 Baud decoder ( Enable KISS ) 10. Run your own program to take in the KISS ( I use UI-VIEW )
Andrew
As an alternative, Pass can control SDR using http://amsat.org.ar/pass.exe .
After starting pass.exe, run HDSDR, easily found on Internet.
On HDSDR Options select DDE to SDR, and there select Orbitron. (Pass behaves as Orbitron)
Then when you click on Pass on Falconsat its frequency is sent to SDR following Dopplers.
Best 73, LU7ABF, Pedro
On Sun, Oct 22, 2017 at 2:20 PM, vk4tec@tech-software.net wrote:
Here is a how to to get Falsconsat-3 with a Airspy Mini
Download and install orbitron as usualDownload the My DDE client from the orbitron sitePlace the MyDDE files into the orbitron directoryDownload an older version of SDR# < 1400Download the satellite tracker plugin and place in sdr# directoryModify the orbitron config fileModify the Plugins.xml for SDR#Run up orbitron and sdr# ( old version ) and select "SDRSharp" from the Radio / Rotor DDE selection.
The key is to get an OLD version of SDR#
Install Virtual Audio CableInstall UZ7HO High Speed 9600 Baud decoder ( Enable KISS )Run your own program to take in the KISS ( I use UI-VIEW )Andrew
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Pedro.
Good Help
How do you update keps for pass ?
Andrew VK4TEC
-----Original Message----- From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Pedro Converso Sent: Thursday, 26 October 2017 5:13 AM To: vk4tec@tech-software.net Cc: AMSAT amsat-bb@amsat.org Subject: Re: [amsat-bb] How to get SDR# to doppler correct SDR from Orbitron
As an alternative, Pass can control SDR using http://amsat.org.ar/pass.exe .
After starting pass.exe, run HDSDR, easily found on Internet.
On HDSDR Options select DDE to SDR, and there select Orbitron. (Pass behaves as Orbitron)
Then when you click on Pass on Falconsat its frequency is sent to SDR following Dopplers.
Best 73, LU7ABF, Pedro
On Sun, Oct 22, 2017 at 2:20 PM, vk4tec@tech-software.net wrote:
Here is a how to to get Falsconsat-3 with a Airspy Mini
Download and install orbitron as usualDownload the My DDE client from the orbitron sitePlace the MyDDE files into the orbitron directoryDownload an older version of SDR# < 1400Download the satellite tracker plugin and place in sdr# directoryModify the orbitron config fileModify the Plugins.xml for SDR#Run up orbitron and sdr# ( old version ) and select "SDRSharp" from the Radio / Rotor DDE selection.
The key is to get an OLD version of SDR#
Install Virtual Audio CableInstall UZ7HO High Speed 9600 Baud decoder ( Enable KISS )Run your own program to take in the KISS ( I use UI-VIEW )Andrew
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
_______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Hello Andrew,
There is no need for user to update Keps on Pass http://amsat.org.ar/pass
Pass updates Keps 8 times a day from Celestrak, Spacetrack & Amsat-NA, using last TLEs available.
Keps in use can be seen or downloaded at http://amsat.org.ar/keps.txt
73, LU7ABF, Pedro
On Thu, Oct 26, 2017 at 2:22 AM, vk4tec@internode.on.net wrote:
Pedro.
Good Help
How do you update keps for pass ?
Andrew VK4TEC
-----Original Message----- From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Pedro Converso Sent: Thursday, 26 October 2017 5:13 AM To: vk4tec@tech-software.net Cc: AMSAT amsat-bb@amsat.org Subject: Re: [amsat-bb] How to get SDR# to doppler correct SDR from Orbitron
As an alternative, Pass can control SDR using http://amsat.org.ar/pass.exe .
After starting pass.exe, run HDSDR, easily found on Internet.
On HDSDR Options select DDE to SDR, and there select Orbitron. (Pass behaves as Orbitron)
Then when you click on Pass on Falconsat its frequency is sent to SDR following Dopplers.
Best 73, LU7ABF, Pedro
On Sun, Oct 22, 2017 at 2:20 PM, vk4tec@tech-software.net wrote:
Here is a how to to get Falsconsat-3 with a Airspy Mini
Download and install orbitron as usualDownload the My DDE client from the orbitron sitePlace the MyDDE files into the orbitron directoryDownload an older version of SDR# < 1400Download the satellite tracker plugin and place in sdr# directoryModify the orbitron config fileModify the Plugins.xml for SDR#Run up orbitron and sdr# ( old version ) and select "SDRSharp" from the Radio / Rotor DDE selection.
The key is to get an OLD version of SDR#
Install Virtual Audio CableInstall UZ7HO High Speed 9600 Baud decoder ( Enable KISS )Run your own program to take in the KISS ( I use UI-VIEW )Andrew
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
participants (3)
-
Pedro Converso -
vk4tec＠internode.on.net -
vk4tec＠tech-software.net