Another approach is to use the DDE Tracker Client

http://www.satsignal.eu/software/DDETracker.html

There are multiple versions, depending on the SDR# release, and the latest versions of SDR# are supported.

73s,

Alan WA4SCA

<-----Original Message----- <From: AMSAT-BB [mailto:amsat-bb-bounces@amsat.org] On Behalf Of <vk4tec@tech-software.net <Sent: Sunday, October 22, 2017 12:21 PM <To: AMSAT amsat-bb@amsat.org <Subject: [amsat-bb] How to get SDR# to doppler correct SDR from Orbitron < <Here is a how to to get Falsconsat-3 with a Airspy Mini < < < <1. Download and install orbitron as usual <2. Download the My DDE client from the orbitron site <3. Place the MyDDE files into the orbitron directory <4. Download an older version of SDR# < 1400 <5. Download the satellite tracker plugin and place in sdr# directory <6. Modify the orbitron config file <7. Modify the Plugins.xml for SDR# < < < <Run up orbitron and sdr# ( old version ) and select "SDRSharp" from the <Radio / Rotor DDE selection. < < < <The key is to get an OLD version of SDR# < < < <8. Install Virtual Audio Cable <9. Install UZ7HO High Speed 9600 Baud decoder ( Enable KISS ) <10. Run your own program to take in the KISS ( I use UI-VIEW ) < < < < < <Andrew < < < <_______________________________________________ <Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available <to all interested persons worldwide without requiring membership. Opinions <expressed <are solely those of the author, and do not reflect the official views of AMSAT- <NA. <Not an AMSAT-NA member? Join now to support the amateur satellite <program! <Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb