Clint:
Are all ham radio activities on the ISS affected by the recently reported problems with newly installed coax?? If I recall, a few school contacts had to be scrubbed. I am thinking it would be nice to get the APRS stuff working again, now that I'm set up to try it.
Thanks, 73
Jim Jipping, W89MRR AMSAT #5512
Jim-
The bad cable affected the Columbus Module which had the new equipment. The Service Module is still working with the old radio. But, like previously, they rarely turn it on. Here's a website that shows current status of the radios: https://www.ariss.org/current-status-of-iss-stations.html
My take on this and what has been observed so far is that except for ARISS school contacts, amateur radio on the ISS is dead until we get the cable fixed.
-David, N9KT
On Sat, Feb 6, 2021 at 2:42 PM James Jipping jhjipping@gmail.com wrote:
Clint:
Are all ham radio activities on the ISS affected by the recently reported problems with newly installed coax?? If I recall, a few school contacts had to be scrubbed. I am thinking it would be nice to get the APRS stuff working again, now that I'm set up to try it.
Thanks, 73
Jim Jipping, W89MRR AMSAT #5512
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program!
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
Hi all, The Kenwood TM-D710GA, located in the Columbus module, is currently off-line due to the coax issue that Frank KA3HDO has written about. This is the newest radio on board and the normal radio for use with the ARISS school contacts, the packet system, and the cross-band repeater. We have had one ARISS school contact fail because of this issue; that school is being rescheduled. The Kenwood TM-710E, located in the Service module is presently being used for ARISS school contacts only but that could change for special events. General contacts with the ham public are very very very rare. As has been posted before, give a listen as you will never know if a crew-member has decided to get on the radio. ARISS can not make the crew use the radio. For those that are interested, the crew operates on this rough daily schedule: Hours when crew might be available: 08:00 to 19:30 UTC Wakeup to Workday start=1.5 hoursWorkday start to Workday end=12 hoursWorkday end to Sleep=2 hoursSleep to wakeup=8.5 hours Usually ARISS is off limits to pre and post sleep times as well as sleep time. I don't know if people realize how difficult it is sometimes to schedule an ARISS contact. Three things have to line up: The crew has to be awake and available, the school has to be awake and available, and the ISS has to be over the ground station. Many times it is easier said than done, especially with the above listened times when they might be available. The schools receive a list of possible times during a specific week that they prioritize and then we present the prioritized lists to the ISS planners. Since ARISS is a guest on board the ISS, we are always thankful when the ISS planners accept one of the proposed times for a school, schedule the contact, and allow the contact to take place. And you might want to know that an ARISS contact time slot is literally a scheduled time-off for the crew-member that gets made up somewhere else. Hope this helps explain things a bit. Frank KA3HDO will keep us all informed on the progress of determining what is happening with the coax issue. We will be letting everyone know when normal operations return to normal just as soon as that becomes available. 73,Charlie Sufana AJ9NOne of the ARISS Mentors In a message dated 2021-02-06 14:42:20 Eastern Standard Time, jhjipping@gmail.com writes: Clint: Are all ham radio activities on the ISS affected by the recently reported problems with newly installed coax?? If I recall, a few school contacts had to be scrubbed. I am thinking it would be nice to get the APRS stuff working again, now that I'm set up to try it. Thanks, 73 Jim Jipping, W89MRRAMSAT #5512 ----------------------------------------------------------- Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum availableto all interested persons worldwide without requiring membership. Opinions expressedare solely those of the author, and do not reflect the official views of AMSAT-NA.Not an AMSAT-NA member? Join now to support the amateur satellite program! View archives of this mailing list athttps://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.orgTo unsubscribe send an email to amsat-bb-leave(a)amsat.orgManage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
Thanks for the update and all the info, Charlie. In particular, I did not know this:
"And you might want to know that an ARISS contact time slot is literally a scheduled time-off for the crew-member that gets made up somewhere else."
Makes me all the more grateful to the astronauts who volunteer to do this.
73, John Brier KG4AKV
On Sat, Feb 6, 2021 at 3:22 PM Charlie Sufana via AMSAT-BB amsat-bb@amsat.org wrote:
Hi all,
The Kenwood TM-D710GA, located in the Columbus module, is currently off-line due to the coax issue that Frank KA3HDO has written about. This is the newest radio on board and the normal radio for use with the ARISS school contacts, the packet system, and the cross-band repeater. We have had one ARISS school contact fail because of this issue; that school is being rescheduled.
The Kenwood TM-710E, located in the Service module is presently being used for ARISS school contacts only but that could change for special events.
General contacts with the ham public are very very very rare. As has been posted before, give a listen as you will never know if a crew-member has decided to get on the radio. ARISS can not make the crew use the radio.
For those that are interested, the crew operates on this rough daily schedule:
Hours when crew might be available: 08:00 to 19:30 UTC
Wakeup to Workday start=1.5 hours Workday start to Workday end=12 hours Workday end to Sleep=2 hours Sleep to wakeup=8.5 hours
Usually ARISS is off limits to pre and post sleep times as well as sleep time.
I don't know if people realize how difficult it is sometimes to schedule an ARISS contact. Three things have to line up: The crew has to be awake and available, the school has to be awake and available, and the ISS has to be over the ground station. Many times it is easier said than done, especially with the above listened times when they might be available. The schools receive a list of possible times during a specific week that they prioritize and then we present the prioritized lists to the ISS planners. Since ARISS is a guest on board the ISS, we are always thankful when the ISS planners accept one of the proposed times for a school, schedule the contact, and allow the contact to take place.
And you might want to know that an ARISS contact time slot is literally a scheduled time-off for the crew-member that gets made up somewhere else.
Hope this helps explain things a bit. Frank KA3HDO will keep us all informed on the progress of determining what is happening with the coax issue.
We will be letting everyone know when normal operations return to normal just as soon as that becomes available.
73, Charlie Sufana AJ9N One of the ARISS Mentors
In a message dated 2021-02-06 14:42:20 Eastern Standard Time, jhjipping@gmail.com writes:
Clint:
Are all ham radio activities on the ISS affected by the recently reported problems with newly installed coax?? If I recall, a few school contacts had to be scrubbed. I am thinking it would be nice to get the APRS stuff working again, now that I'm set up to try it.
Thanks, 73
Jim Jipping, W89MRR AMSAT #5512
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program!
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program!
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
Thank you Charlie AJ9N for giving additional info on ISS crew scheduling hours and the situation lineup required for possible ARISS school contact. I shall insert this points as well in my ARISS awareness program presentation.
Here I am doing my best and enjoy promoting amateur radio satellite/space science activities in schools/colleges in Western India region.
Btw, hope coax issue on Columbus module will also be fixed soon.
73 Rajesh Vagadia VU2EXP Regional Coordinator West India Zone AMSAT-INDIA
On Sun 7 Feb, 2021, 1:52 AM Charlie Sufana via AMSAT-BB, amsat-bb@amsat.org wrote:
Hi all,
The Kenwood TM-D710GA, located in the Columbus module, is currently off-line due to the coax issue that Frank KA3HDO has written about. This is the newest radio on board and the normal radio for use with the ARISS school contacts, the packet system, and the cross-band repeater. We have had one ARISS school contact fail because of this issue; that school is being rescheduled.
The Kenwood TM-710E, located in the Service module is presently being used for ARISS school contacts only but that could change for special events.
General contacts with the ham public are very very very rare. As has been posted before, give a listen as you will never know if a crew-member has decided to get on the radio. ARISS can not make the crew use the radio.
For those that are interested, the crew operates on this rough daily schedule:
Hours when crew might be available: 08:00 to 19:30 UTC
Wakeup to Workday start=1.5 hours Workday start to Workday end=12 hours Workday end to Sleep=2 hours Sleep to wakeup=8.5 hours
Usually ARISS is off limits to pre and post sleep times as well as sleep time.
I don't know if people realize how difficult it is sometimes to schedule an ARISS contact. Three things have to line up: The crew has to be awake and available, the school has to be awake and available, and the ISS has to be over the ground station. Many times it is easier said than done, especially with the above listened times when they might be available. The schools receive a list of possible times during a specific week that they prioritize and then we present the prioritized lists to the ISS planners. Since ARISS is a guest on board the ISS, we are always thankful when the ISS planners accept one of the proposed times for a school, schedule the contact, and allow the contact to take place.
And you might want to know that an ARISS contact time slot is literally a scheduled time-off for the crew-member that gets made up somewhere else.
Hope this helps explain things a bit. Frank KA3HDO will keep us all informed on the progress of determining what is happening with the coax issue.
We will be letting everyone know when normal operations return to normal just as soon as that becomes available.
73, Charlie Sufana AJ9N One of the ARISS Mentors
In a message dated 2021-02-06 14:42:20 Eastern Standard Time, jhjipping@gmail.com writes:
Clint:
Are all ham radio activities on the ISS affected by the recently reported problems with newly installed coax?? If I recall, a few school contacts had to be scrubbed. I am thinking it would be nice to get the APRS stuff working again, now that I'm set up to try it.
Thanks, 73
Jim Jipping, W89MRR AMSAT #5512
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program!
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program!
View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
You never hear of any of the crew just "playing radio". They all have tech tickets. You know get WAS DXCC etc. The height of there antenna is an advantage. For most it's not a hobby, but part of the job. I did talk with them back in the 90's. I'll always remember it. 73 Bob W7LRD
On 02/06/2021 12:21 PM Charlie Sufana via AMSAT-BB <amsat-bb@amsat.org> wrote: Hi all, The Kenwood TM-D710GA, located in the Columbus module, is currently off-line due to the coax issue that Frank KA3HDO has written about. This is the newest radio on board and the normal radio for use with the ARISS school contacts, the packet system, and the cross-band repeater. We have had one ARISS school contact fail because of this issue; that school is being rescheduled. The Kenwood TM-710E, located in the Service module is presently being used for ARISS school contacts only but that could change for special events. General contacts with the ham public are very very very rare. As has been posted before, give a listen as you will never know if a crew-member has decided to get on the radio. ARISS can not make the crew use the radio. For those that are interested, the crew operates on this rough daily schedule: Hours when crew might be available: 08:00 to 19:30 UTC Wakeup to Workday start=1.5 hours Workday start to Workday end=12 hours Workday end to Sleep=2 hours Sleep to wakeup=8.5 hours Usually ARISS is off limits to pre and post sleep times as well as sleep time. I don't know if people realize how difficult it is sometimes to schedule an ARISS contact. Three things have to line up: The crew has to be awake and available, the school has to be awake and available, and the ISS has to be over the ground station. Many times it is easier said than done, especially with the above listened times when they might be available. The schools receive a list of possible times during a specific week that they prioritize and then we present the prioritized lists to the ISS planners. Since ARISS is a guest on board the ISS, we are always thankful when the ISS planners accept one of the proposed times for a school, schedule the contact, and allow the contact to take place. And you might want to know that an ARISS contact time slot is literally a scheduled time-off for the crew-member that gets made up somewhere else. Hope this helps explain things a bit. Frank KA3HDO will keep us all informed on the progress of determining what is happening with the coax issue. We will be letting everyone know when normal operations return to normal just as soon as that becomes available. 73, Charlie Sufana AJ9N One of the ARISS Mentors In a message dated 2021-02-06 14:42:20 Eastern Standard Time, jhjipping@gmail.com writes: > > Clint:
Are all ham radio activities on the ISS affected by the recently reported problems with newly installed coax?? If I recall, a few school contacts had to be scrubbed. I am thinking it would be nice to get the APRS stuff working again, now that I'm set up to try it. Thanks, 73 Jim Jipping, W89MRR AMSAT #5512 ----------------------------------------------------------- Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org https://mailman.amsat.org >
----------------------------------------------------------- Sent via AMSAT-BB(a)amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! View archives of this mailing list at https://mailman.amsat.org/hyperkitty/list/amsat-bb@amsat.org To unsubscribe send an email to amsat-bb-leave(a)amsat.org Manage all of your AMSAT-NA mailing list preferences at https://mailman.amsat.org
participants (6)
-
73 Bob W7LRD
-
aj9n@aol.com
-
David Spoelstra
-
James Jipping
-
John Brier
-
Rajesh Vagadia - VU2EXP