I want to monitor a few satellites by using my Funcube Dongle Pro Plus on a different computer. I have a spare antenna, an M2 2m440XP ?
I've tried setting the FCDP+ to a frequency with their own controlling device then letting MixW or UISS/Soundmodem listen ... but nothing gets decoded.
Is this even possible?
73,
Are you using the Funcube Dashboard software to tune the dongle?
Michael Vivona Sent from my iPad
On Aug 20, 2015, at 3:43 PM, Bob KD7YZ [email protected] wrote:
I want to monitor a few satellites by using my Funcube Dongle Pro Plus on a different computer. I have a spare antenna, an M2 2m440XP ?
I've tried setting the FCDP+ to a frequency with their own controlling device then letting MixW or UISS/Soundmodem listen ... but nothing gets decoded.
Is this even possible?
73,
On 21-Aug-15 0653, Mvivona wrote:
Are you using the Funcube Dashboard software to tune the dongle?
well, yes, when I am letting Dashboard track and report a pass of AO-73.
73,
You need to use an SDR program like HDSDR or SDR# and a Virtual Audio Cable to feed the audio to MixW, UISS, or Soundmodem.
73,
Paul, N8HM
On Thu, Aug 20, 2015 at 3:43 PM, Bob KD7YZ [email protected] wrote:
I want to monitor a few satellites by using my Funcube Dongle Pro Plus on a different computer. I have a spare antenna, an M2 2m440XP ?
I've tried setting the FCDP+ to a frequency with their own controlling device then letting MixW or UISS/Soundmodem listen ... but nothing gets decoded.
Is this even possible?
73,
Bob KD7YZ http://www.qrz.com/db/kd7yz AMSAT LM#901 _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
On 21-Aug-15 1336, Paul Stoetzer wrote:
You need to use an SDR program like HDSDR or SDR# and a Virtual Audio Cable to feed the audio to MixW, UISS, or Soundmodem.
I got this link: http://www.pe0sat.vgnet.nl/decoding/block-diagram/
and did install a virtual audio cable, Paul. Thanks to PE0SAT for that info.
Now I need tweaking info, hi hi . I saw the ISS earlier with FCDP+/SDR#/MixW3 by using the Virtual Audio Cale's In and Out.
Though 145.825 burst were clearly defined and nicely strong, MixW3 got no decodes.
However, when I used the IC910 thru the other antennas, The Funcube-Lashup into MixW3 did decode my KD7YZ/RS0OSS/CQ packets via the M2-2M-440XP .. as I said, at the moment, ISS was quite strong on a wet noodle.
So The entire process is correctly built,lashed. I just think I need to find out how to boost the audio that is winding up inputted to MixW3.
I guess. What other tweaks to I try?
73,
participants (3)
-
Bob KD7YZ -
Mvivona -
Paul Stoetzer