Apologies for what could be an easy question but I am a bit new to this. Just getting the station set up at the moment.
I have installed SAT32PC and have it tracking a number of the amateur satellites. I have noticed a few sats including PO101, CAS4A and 4B don’t have any frequency info shown in the window above the map.
Not sure how to resolve this so any help appreciated.
Thanks
Paul MM0ZBH
Paul,
You need to make entries in the doppler.sqf file with the frequency info. Here's a write up that should help you out.
amsat-uk.org/2013/11/23/adding-new-satellites-to-satpc32/amp/
Also there's a Doppler.sqf line generator that's on the AMSAT website where you plug in frequencies and modes and it will generate the proper info.
https://www.amsat.org/doppler-sqf-line-generator/
Dave-KB1PVH
Sent from my Galaxy S9
On Wed, May 6, 2020, 4:40 PM Paul Mcl via AMSAT-BB amsat-bb@amsat.org wrote:
Apologies for what could be an easy question but I am a bit new to this. Just getting the station set up at the moment.
I have installed SAT32PC and have it tracking a number of the amateur satellites. I have noticed a few sats including PO101, CAS4A and 4B don’t have any frequency info shown in the window above the map.
Not sure how to resolve this so any help appreciated.
Thanks
Paul MM0ZBH _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Hi Paul
I did this video for new users that might help you out.
When you don't have a frequency it is due to the fact that the doppler.sqf file doesn't have an entry.
Here are my entries.
PO-101,145.900,437.500,FM,FM,NOR,0,0,FM Voice CAS-4A,145870.0,435219.2,USB,LSB,REV,0,0,SSB CAS-4A,145855.0,0,USB,LSB,REV,0,0,CW Beacon CAS-4B,145925.0,435279,USB,LSB,REV,0,0,SSB CAS-4B,145910.0,0,USB,LSB,REV,0,0,Beacon
Mike va3mw
On Wed, May 6, 2020 at 4:39 PM Paul Mcl via AMSAT-BB amsat-bb@amsat.org wrote:
Apologies for what could be an easy question but I am a bit new to this. Just getting the station set up at the moment.
I have installed SAT32PC and have it tracking a number of the amateur satellites. I have noticed a few sats including PO101, CAS4A and 4B don’t have any frequency info shown in the window above the map.
Not sure how to resolve this so any help appreciated.
Thanks
Paul MM0ZBH _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Thanks guys, that was the missing link.
Regards
Paul
On Wed, 6 May 2020 at 21:55, Michael Walker va3mw@portcredit.net wrote:
Hi Paul
I did this video for new users that might help you out.
When you don't have a frequency it is due to the fact that the doppler.sqf file doesn't have an entry.
Here are my entries.
PO-101,145.900,437.500,FM,FM,NOR,0,0,FM Voice CAS-4A,145870.0,435219.2,USB,LSB,REV,0,0,SSB CAS-4A,145855.0,0,USB,LSB,REV,0,0,CW Beacon CAS-4B,145925.0,435279,USB,LSB,REV,0,0,SSB CAS-4B,145910.0,0,USB,LSB,REV,0,0,Beacon
Mike va3mw
On Wed, May 6, 2020 at 4:39 PM Paul Mcl via AMSAT-BB amsat-bb@amsat.org wrote:
Apologies for what could be an easy question but I am a bit new to this. Just getting the station set up at the moment.
I have installed SAT32PC and have it tracking a number of the amateur satellites. I have noticed a few sats including PO101, CAS4A and 4B don’t have any frequency info shown in the window above the map.
Not sure how to resolve this so any help appreciated.
Thanks
Paul MM0ZBH _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Here is a "revolutionary" thought:..... there is a manual :-)
73, Stefan VE4SW
On Wed, May 6, 2020 at 4:20 PM Paul Mcl via AMSAT-BB amsat-bb@amsat.org wrote:
Thanks guys, that was the missing link.
Regards
Paul
On Wed, 6 May 2020 at 21:55, Michael Walker va3mw@portcredit.net wrote:
Hi Paul
I did this video for new users that might help you out.
When you don't have a frequency it is due to the fact that the
doppler.sqf
file doesn't have an entry.
Here are my entries.
PO-101,145.900,437.500,FM,FM,NOR,0,0,FM Voice CAS-4A,145870.0,435219.2,USB,LSB,REV,0,0,SSB CAS-4A,145855.0,0,USB,LSB,REV,0,0,CW Beacon CAS-4B,145925.0,435279,USB,LSB,REV,0,0,SSB CAS-4B,145910.0,0,USB,LSB,REV,0,0,Beacon
Mike va3mw
On Wed, May 6, 2020 at 4:39 PM Paul Mcl via AMSAT-BB <amsat-bb@amsat.org
wrote:
Apologies for what could be an easy question but I am a bit new to this. Just getting the station set up at the moment.
I have installed SAT32PC and have it tracking a number of the amateur satellites. I have noticed a few sats including PO101, CAS4A and 4B
don’t
have any frequency info shown in the window above the map.
Not sure how to resolve this so any help appreciated.
Thanks
Paul MM0ZBH _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
There is also this from AMSAT-UK
https://amsat-uk.org/2013/11/23/adding-new-satellites-to-satpc32/
73,
Craig N6RSX
-----Original Message----- From: AMSAT-BB amsat-bb-bounces@amsat.org On Behalf Of Stefan Wagener via AMSAT-BB Sent: Wednesday, May 6, 2020 2:52 PM To: Paul Mcl paul.mcl@gmail.com Cc: Amsat amsat-bb@amsat.org Subject: Re: [amsat-bb] SAT32PC question
Here is a "revolutionary" thought:..... there is a manual :-)
73, Stefan VE4SW
On Wed, May 6, 2020 at 4:20 PM Paul Mcl via AMSAT-BB amsat-bb@amsat.org wrote:
Thanks guys, that was the missing link.
Regards
Paul
On Wed, 6 May 2020 at 21:55, Michael Walker va3mw@portcredit.net wrote:
Hi Paul
I did this video for new users that might help you out.
When you don't have a frequency it is due to the fact that the
doppler.sqf
file doesn't have an entry.
Here are my entries.
PO-101,145.900,437.500,FM,FM,NOR,0,0,FM Voice CAS-4A,145870.0,435219.2,USB,LSB,REV,0,0,SSB CAS-4A,145855.0,0,USB,LSB,REV,0,0,CW Beacon CAS-4B,145925.0,435279,USB,LSB,REV,0,0,SSB CAS-4B,145910.0,0,USB,LSB,REV,0,0,Beacon
Mike va3mw
On Wed, May 6, 2020 at 4:39 PM Paul Mcl via AMSAT-BB <amsat-bb@amsat.org
wrote:
Apologies for what could be an easy question but I am a bit new to this. Just getting the station set up at the moment.
I have installed SAT32PC and have it tracking a number of the amateur satellites. I have noticed a few sats including PO101, CAS4A and 4B
don’t
have any frequency info shown in the window above the map.
Not sure how to resolve this so any help appreciated.
Thanks
Paul MM0ZBH _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
_______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
(If this message is spam, please report it to IT Dept. Thank you.)
Nice comment... it really isn't useful if you are swimming in tech.
I have to admit I have never been in a group where it is often said, but the AMSAT group is the leader.... read the manual but without any help to clarify the terms.
Sometimes, you actually need to teach.
Mike va3mw
On Wed, May 6, 2020 at 5:52 PM Stefan Wagener wageners@gmail.com wrote:
Here is a "revolutionary" thought:..... there is a manual :-)
73, Stefan VE4SW
On Wed, May 6, 2020 at 4:20 PM Paul Mcl via AMSAT-BB amsat-bb@amsat.org wrote:
Thanks guys, that was the missing link.
Regards
Paul
On Wed, 6 May 2020 at 21:55, Michael Walker va3mw@portcredit.net wrote:
Hi Paul
I did this video for new users that might help you out.
When you don't have a frequency it is due to the fact that the
doppler.sqf
file doesn't have an entry.
Here are my entries.
PO-101,145.900,437.500,FM,FM,NOR,0,0,FM Voice CAS-4A,145870.0,435219.2,USB,LSB,REV,0,0,SSB CAS-4A,145855.0,0,USB,LSB,REV,0,0,CW Beacon CAS-4B,145925.0,435279,USB,LSB,REV,0,0,SSB CAS-4B,145910.0,0,USB,LSB,REV,0,0,Beacon
Mike va3mw
On Wed, May 6, 2020 at 4:39 PM Paul Mcl via AMSAT-BB <
amsat-bb@amsat.org>
wrote:
Apologies for what could be an easy question but I am a bit new to
this.
Just getting the station set up at the moment.
I have installed SAT32PC and have it tracking a number of the amateur satellites. I have noticed a few sats including PO101, CAS4A and 4B
don’t
have any frequency info shown in the window above the map.
Not sure how to resolve this so any help appreciated.
Thanks
Paul MM0ZBH _______________________________________________ Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views
of
AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
participants (5)
-
D. Craig Fox -
Dave Webb KB1PVH -
Michael Walker -
Paul Mcl -
Stefan Wagener