Can you tell me what tone I need to access SO50. 67HZ uplink or 74.4Hz?thanksRich [email protected]
67 hz.
On Sep 2, 2019, at 4:19 PM, RG via AMSAT-BB [email protected] wrote:
Can you tell me what tone I need to access SO50. 67HZ uplink or 74.4Hz?thanksRich [email protected] _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
74.4 will activate the satellite if it hasn't been on for 10 minutes. Then 67 to communicate on it.
On Mon, Sep 2, 2019, 5:22 PM Frank via AMSAT-BB [email protected] wrote:
67 hz.
On Sep 2, 2019, at 4:19 PM, RG via AMSAT-BB [email protected] wrote:
Can you tell me what tone I need to access SO50. 67HZ uplink or
74.4Hz?thanksRich
[email protected] _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Even if it is on and in use it turns off every 10 minutes and has to be rearmed with 74.4. That is why sometimes on a busy pass it will go silent for a while... Until someone that knows this rearms it.
73, John Brier KG4AKV
On Mon, Sep 2, 2019, 19:34 H. Stephen Nipper via AMSAT-BB < [email protected]> wrote:
74.4 will activate the satellite if it hasn't been on for 10 minutes. Then 67 to communicate on it.
On Mon, Sep 2, 2019, 5:22 PM Frank via AMSAT-BB [email protected] wrote:
67 hz.
On Sep 2, 2019, at 4:19 PM, RG via AMSAT-BB [email protected]
wrote:
Can you tell me what tone I need to access SO50. 67HZ uplink or
74.4Hz?thanksRich
[email protected] _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions expressed
are solely those of the author, and do not reflect the official views
of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
It's also worth mentioning (and I just learned this by experience this weekend) that the repeater transmitter does not stay on after the 67Hz tone stops un the uplink. And when you transmit again with the 67Hz tone, there is a momentary delay before it starts relaying. This behavior is all AFTER it is armed with 74.4.
On Mon, Sep 2, 2019 at 7:41 PM John Brier via AMSAT-BB [email protected] wrote:
Even if it is on and in use it turns off every 10 minutes and has to be rearmed with 74.4. That is why sometimes on a busy pass it will go silent for a while... Until someone that knows this rearms it.
73, John Brier KG4AKV
On Mon, Sep 2, 2019, 19:34 H. Stephen Nipper via AMSAT-BB < [email protected]> wrote:
74.4 will activate the satellite if it hasn't been on for 10 minutes.
Then
67 to communicate on it.
On Mon, Sep 2, 2019, 5:22 PM Frank via AMSAT-BB [email protected] wrote:
67 hz.
On Sep 2, 2019, at 4:19 PM, RG via AMSAT-BB [email protected]
wrote:
Can you tell me what tone I need to access SO50. 67HZ uplink or
74.4Hz?thanksRich
[email protected] _______________________________________________ Sent via [email protected]. AMSAT-NA makes this open forum
available
to all interested persons worldwide without requiring membership.
Opinions expressed
are solely those of the author, and do not reflect the official views
of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings:
https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official views
of
AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership.
Opinions
expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite
program!
Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
Sent via [email protected]. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
You do need to turn it on by transmitting a 2second carrier with a 74.4 hz tone then a 67hz tone to work it.73Rick Tejera (K7TEJ)Saguaro Astronomy ClubWww.saguaroastro.orgThunderbird Astronomy ClubWww.w7tbc.org -------- Original message --------From: Frank via AMSAT-BB [email protected] Date: 9/2/19 16:21 (GMT-07:00) To: RG [email protected] Cc: [email protected] Subject: Re: [amsat-bb] CTCSS tone SO50 67 hz.> On Sep 2, 2019, at 4:19 PM, RG via AMSAT-BB [email protected] wrote:> > Can you tell me what tone I need to access SO50. 67HZ uplink or 74.4Hz?thanksRich> [email protected]> _______________________________________________> Sent via [email protected]. AMSAT-NA makes this open forum available> to all interested persons worldwide without requiring membership. Opinions expressed> are solely those of the author, and do not reflect the official views of AMSAT-NA.> Not an AMSAT-NA member? Join now to support the amateur satellite program!> Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb_____________________________... via [email protected]. AMSAT-NA makes this open forum availableto all interested persons worldwide without requiring membership. Opinions expressedare solely those of the author, and do not reflect the official views of AMSAT-NA.Not an AMSAT-NA member? Join now to support the amateur satellite program!Subscription settings: https://www.amsat.org/mailman/listinfo/amsat-bb
participants (6)
-
Burns Fisher -
Frank -
H. Stephen Nipper -
John Brier -
RG -
saguaroastro