Hello.
Can anyone help with the syntax in the subtone.sqf for ic-910? I have tried "almost everthing" but the subtone are still in the standard value 88.5 I can set it manually to 67.0 and 74.4 for SO-50. I also see that I have to change "NOR" and "REV" manually.
Maybe some can write this line correct for Icom IC-910?
SO-50,67.0,??? SO-50,74.4,???
When I connect, and change the settings for the rig, my old TS-790 works great.
73, Paul LB2TG
My IC-910 settings:
The following lines for SubTone.SQF are in my file for SO-50 and work fine.
SO-50,67.0,$3F,1 SO-50,74.4,$3E,3
The following in Doppler.SQF
SO-50,436795,145850,FM,FM,NOR,0,0
Make sure under MODE setup you use 60$ for the IC-910.
You shouldn't have to do anything manually unless you want to override for a particular reason.
Reid, W4UPD
On 10/31/2016 8:44 AM, LB2TG Paul wrote:
Hello.
Can anyone help with the syntax in the subtone.sqf for ic-910? I have tried "almost everthing" but the subtone are still in the standard value 88.5 I can set it manually to 67.0 and 74.4 for SO-50. I also see that I have to change "NOR" and "REV" manually.
Maybe some can write this line correct for Icom IC-910?
SO-50,67.0,??? SO-50,74.4,???
When I connect, and change the settings for the rig, my old TS-790 works great.
73, Paul LB2TG
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Paul, the subtone.sqf that comes with SatPC32 should work. A reason of the problem could be: With the American version of the IC-910H you need the SatPC32 version for American users, with the European model the program version for European users. The two models models are different regarding control of the sub tone functions and with the wrong SatPC32 version sub tone control doesn't work.
The REV/NOR parameter in Doppler.SQF doesn't switch the radio between revers and normal satellite tracking. With REV the program changes uplink and downlink in the opposite directions when you tune around the passband, with NOR in the same directions (only AO-07 in mode A at present). With FM sats the setting is meaningless.
73s, Erich, DK1TB
Am 31.10.2016 um 13:44 schrieb LB2TG Paul:
Hello.
Can anyone help with the syntax in the subtone.sqf for ic-910? I have tried "almost everthing" but the subtone are still in the standard value 88.5 I can set it manually to 67.0 and 74.4 for SO-50. I also see that I have to change "NOR" and "REV" manually.
Maybe some can write this line correct for Icom IC-910?
SO-50,67.0,??? SO-50,74.4,???
When I connect, and change the settings for the rig, my old TS-790 works great.
73, Paul LB2TG
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Hello.
Thanks a lot. If I understand this correct... Since I have a EU model modified to use subtones for repeaters I have to download and install dk1tb.de/satpcsetup_a_128c.ZI http://www.dk1tb.de/satpcsetup_a_128c.ZI
http://www.dk1tb.de/satpcsetup_a_128c.ZI
I'll give it a try later on and post the result. I guess I am not the only one who has done this modification on the 910.
73, Paul LB2TG
________________________________ Fra: Erich Eichmann erich.eichmann@t-online.de Sendt: 31. oktober 2016 23:16 Til: LB2TG Paul; AMSAT-BB@amsat.org Emne: Re: [amsat-bb] SatPC32 (12.8c)-icom 910-subtone.sqf
Paul, the subtone.sqf that comes with SatPC32 should work. A reason of the problem could be: With the American version of the IC-910H you need the SatPC32 version for American users, with the European model the program version for European users. The two models models are different regarding control of the sub tone functions and with the wrong SatPC32 version sub tone control doesn't work.
The REV/NOR parameter in Doppler.SQF doesn't switch the radio between revers and normal satellite tracking. With REV the program changes uplink and downlink in the opposite directions when you tune around the passband, with NOR in the same directions (only AO-07 in mode A at present). With FM sats the setting is meaningless.
73s, Erich, DK1TB
Am 31.10.2016 um 13:44 schrieb LB2TG Paul:
Hello.
Can anyone help with the syntax in the subtone.sqf for ic-910? I have tried "almost everthing" but the subtone are still in the standard value 88.5 I can set it manually to 67.0 and 74.4 for SO-50. I also see that I have to change "NOR" and "REV" manually.
Maybe some can write this line correct for Icom IC-910?
SO-50,67.0,??? SO-50,74.4,???
When I connect, and change the settings for the rig, my old TS-790 works great.
73, Paul LB2TG
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
Hi.
Thanks to Erich the subtones now are ok.
My IC-910 orginally had only 1750Hz tone. For working our new repeaters the rig was modified to transmit subtones.
SatPC32
The solution was to uninstall the European version of SatPc32 and install the US version.
Now everything seems to be ok!
Thanks to all for help with this "challenge".
73, Paul LB2TG
________________________________ Fra: Erich Eichmann erich.eichmann@t-online.de Sendt: 31. oktober 2016 23:16 Til: LB2TG Paul; AMSAT-BB@amsat.org Emne: Re: [amsat-bb] SatPC32 (12.8c)-icom 910-subtone.sqf
Paul, the subtone.sqf that comes with SatPC32 should work. A reason of the problem could be: With the American version of the IC-910H you need the SatPC32 version for American users, with the European model the program version for European users. The two models models are different regarding control of the sub tone functions and with the wrong SatPC32 version sub tone control doesn't work.
The REV/NOR parameter in Doppler.SQF doesn't switch the radio between revers and normal satellite tracking. With REV the program changes uplink and downlink in the opposite directions when you tune around the passband, with NOR in the same directions (only AO-07 in mode A at present). With FM sats the setting is meaningless.
73s, Erich, DK1TB
Am 31.10.2016 um 13:44 schrieb LB2TG Paul:
Hello.
Can anyone help with the syntax in the subtone.sqf for ic-910? I have tried "almost everthing" but the subtone are still in the standard value 88.5 I can set it manually to 67.0 and 74.4 for SO-50. I also see that I have to change "NOR" and "REV" manually.
Maybe some can write this line correct for Icom IC-910?
SO-50,67.0,??? SO-50,74.4,???
When I connect, and change the settings for the rig, my old TS-790 works great.
73, Paul LB2TG
Sent via AMSAT-BB@amsat.org. AMSAT-NA makes this open forum available to all interested persons worldwide without requiring membership. Opinions expressed are solely those of the author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
AMSAT-BB Info Pagehttp://www.amsat.org/mailman/listinfo/amsat-bb www.amsat.org To see the collection of prior postings to the list, visit the AMSAT-BB Archives. Using AMSAT-BB: To post a message to all the list members, send ...
participants (3)
-
Erich Eichmann -
LB2TG Paul -
w4upd