Signal from OREOS over Brasil, orbit#28, on 437.305 MHz: KF6JBP/TELEM>UNDEF>UI,C,F0: OOREOS.org D8453701BE000103020E031900160012040D5F094300204B46 73 de Roland PY4ZBZ
I have two Icom hand mics. Both have 8 pin foster connectors. Both seem to work with the 910, including the up/dwn frequency function. For some reason I labeled one 2 wire, the other 3 wire. I forgot why I did this. Anyone have a clue before I start taking them apart to try and figure out?
73 Jeff kb2m
The answer is....
As I don't know where the original HM-12 is I replacing it with an HM-36. There are two versions. I will ship the 2 wire with 910. The person who is buying it is going to replace it with a DTMF mic anyway. I will save the 3 wire HM-36 to go with the IC-7200 that I'm also selling. Me, I can't hear any difference between the two mic's.
73 Jeff kb2m
-----Original Message----- From: amsat-bb-bounces@amsat.org [mailto:amsat-bb-bounces@amsat.org] On Behalf Of Jeff KB2M Sent: Tuesday, November 23, 2010 16:52 PM To: 'AMSAT' Subject: [amsat-bb] Icom 910 hand mic
I have two Icom hand mics. Both have 8 pin foster connectors. Both seem to work with the 910, including the up/dwn frequency function. For some reason I labeled one 2 wire, the other 3 wire. I forgot why I did this. Anyone have a clue before I start taking them apart to try and figure out?
73 Jeff kb2m
_______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
participants (2)
-
Jeff KB2M -
Roland Zurmely